answersLogoWhite

0

What else can I help you with?

Continue Learning about General Science

What is a regular flame on the Bunsen burner?

I am not 100% sure what you are asking here however I will do my best to answer it. The gas that is used in most bunsen burners is methane (natural gas). This is not true for all labs as I have heard of labs using town gas (which is made from distillation of coal). A regular flame on a bunsen is orange this the coolest flame (300°C) and is rarely used. more common will be the blue flame which closer to 700°C. When leaving the bunsen for any length of time the orange flame should be left on as it is easy to observe and insures the safety of your fellow class mates.


What type of a flame is best to use?

if you are talking about what flame to use on a Bunsen burner than the yellow flame is to make sure that everyone knows that there is a flame but the blue flame (less visible) is used as the hotter flame and the better one.


What were Robert Bunsen's contributions?

Robert Bunsen was a German chemist best known for his development of the Bunsen burner, an essential tool for heating substances in laboratories. He also made significant contributions to analytical chemistry, particularly in the field of spectroscopy, where he discovered cesium and rubidium. Bunsen's work laid the foundation for modern analytical techniques, and he was notable for promoting the use of scientific methods in chemistry education. Additionally, he collaborated with Gustav Kirchhoff to establish the principles of spectroscopy, enhancing our understanding of chemical elements and their emission spectra.


What equipment do you need to break up molecules?

Hadron Collider - high powered electromagents in a ring, orientated so that they accelerate the particle (typically a neutron) at the molecule you want to break up (this might have to be repeated several times depending on the size of the molecule). This will most likely break apart the molecules as well as the atoms though... (depending on the velocity of the particle.) Hydro-carbon: heat is best, therefore Bunsen Burner, Furnace or High Powered Lasers etc. Electrolytes: use electrolysis, therefore two conductive rods (typical carbon) connected to a power supply, of which you have to melt/dissolve the material beforehand.


What is the best method of protection?

The best method of protection often depends on the context, but generally, a combination of proactive measures and preparedness is most effective. This includes assessing risks, implementing safety protocols, and using appropriate technology or equipment. For personal safety, awareness and avoidance of dangerous situations can be crucial. Ultimately, a tailored approach based on specific threats is essential for optimal protection.

Related Questions

What is an gauze mat used for?

A gauze mat is used below bunsen burners as it protects the tripod or surface which the bunsen burner might be on. It is most likely to be made of thick metal threads threaded into a mat or square. It is best if it is not touched during an experiment including a bunsen burner as it probably will result in mild to severe burns.


What is Robert Wilhelm Bunsen nationality?

Robert Wilhelm Bunsen was German. He was born on March 30, 1811, in Göttingen, which was part of the Kingdom of Hanover in Germany at the time. Bunsen is best known for his work in chemistry and for the development of the Bunsen burner.


What is the best flame from a Bunsen Burner?

The most stable flame is a blue flame (produced when air valve is open)


What did Robert Bunsen study?

Robert Bunsen was a German chemist who studied and made significant contributions to the field of chemistry, particularly in the areas of chemical analysis and spectroscopy. He is best known for his development of the Bunsen burner, a widely used laboratory tool for heating, sterilizing, and combustion reactions.


What was Robert Bunsen best remembered for?

He is best remembered for inventing the burner which still bears his name. The Bunsen burner is practical because it focuses a lot of heat in a small area, making it efficient for heating small vessels such as a test tube. Also, the heat rises straight up from the burner, meaning excess heat escapes vertically and not outward toward the person using it. So it's efficient and safe.


What is the best way to heat a beaker of water on a Bunsen burner?

The best way to heat a beaker of water on a Bunsen burner is to adjust the air hole to get a blue flame, place the beaker on a wire gauze to distribute heat evenly, and continuously stir the water with a glass rod to ensure uniform heating. Additionally, you should monitor the temperature with a thermometer to prevent overheating.


What accident made Robert Bunsen go blind?

Robert Bunsen did not go blind; he experienced a significant injury to his eye during a laboratory accident involving a chemical explosion. This incident led to the loss of sight in one eye, but he continued his scientific work despite this setback. Bunsen is best known for his contributions to chemistry and the development of the Bunsen burner.


What are the best safety tips for using an indoor wok burner?

The best safety tips for using an indoor wok burner are to always keep the area around the burner clear of any flammable materials, never leave the burner unattended while it is on, and make sure to turn off the burner and unplug it when not in use. Additionally, always use the appropriate cookware and utensils to prevent accidents and burns.


When heating a substance over a bunsen burner where should the object be placed for most efficient heating?

The object should be placed at the tip of the inner blue cone of the bunsen burner flame. This is the hottest part of the flame and will provide the most efficient heating to the substance. Adjust the height of the object as needed to maintain the best heating.


What are the best safety tips for using a home wok burner?

The best safety tips for using a home wok burner are to always keep the area around the burner clear of any flammable materials, never leave the burner unattended while it is on, and make sure to turn off the burner and let it cool down completely after use. Additionally, always use oven mitts or pot holders when handling the wok or the burner to prevent burns.


Why is it no use trying to heat something too close to the opening chimney of a Bunsen burner?

Heating something too close to the opening chimney of a Bunsen burner can result in inefficient heating due to reduced air flow. The intense heat from the burner can also cause overheating and possible combustion of the sample or chemicals being heated. It is best to maintain an appropriate distance to ensure proper heating and prevent accidents.


If you were to determine the boiling point of diethyl ether would you use a Bunsen burner to heat the solvent in a beaker?

No, a Bunsen burner may not be the best choice for heating diethyl ether due to its low boiling point and flammability. It is recommended to use a heating mantle or a hot plate with proper safety precautions to determine the boiling point of diethyl ether.