0
What is the conversion between Republic EZ broadcast spreader and scotts broadcast spreader?
The Republic EZ broadcast spreader and the Scotts broadcast spreader do not have a direct conversion, as they are designed for different types of applications and may have varying settings for seed and fertilizer types. However, many users find that a general rule of thumb is to adjust the settings based on the specific product being used, often starting with a mid-range setting and adjusting as needed. It's important to consult the product manual or guidelines for each specific spreader to ensure accurate application rates.
What else can I help you with?
What is the conversion between Scott drop spreader settings and lbs per square foot?
There is no direct conversion based on weight per area, because it fully depends upon the size of the granules.
What setting should you put 13-13-13 fertilizer on a scotts rotary spreader?
To apply 13-13-13 fertilizer using a Scotts rotary spreader, set the spreader to a setting between 3 and 4, depending on the specific model of the spreader and the application rate recommended on the fertilizer package. It's important to adjust based on the size of your lawn and the desired coverage. Always perform a test run in a small area first to ensure even distribution and avoid over-fertilization.
What statements best describe a conversion factor?
Given two variables n a linear relationship, the conversion factor between them is the gradient of their graph.
Is 1 kilometer divided by 1000 meters a valid conversion factor?
No. 1000 m = 1 km so no conversion is taking place.
How many meter are in a cemeter?
The conversion relations between m and cm are given .the relation is as follows . 1 m=100 cm.
What setting should you use for lawn seed on a broadcast spreader?
The setting for lawn seed on a broadcast spreader typically ranges between 3 to 5, but it can vary depending on the specific type of seed and the spreader model. Always refer to the seed package for recommended spreader settings and adjust based on your lawn's needs and your spreader's calibration. It's also advisable to test the spreader on a small area first to ensure even distribution.
What is the conversion between Scott spreader settings and lbs per square foot?
This is pretty simple, but not well documented. The Scott's standard broadcast spreader setting is based on the number of pounds per 1000 square feet. For the product below, the application rate is 11.5 lbs/5000 square feet. If you reduce this, it becomes 2.3 lbs/1000 square feet... so the setting should be 2.3 --------------- http://www.scotts.com/smg/products/ortho/outdoor_bug_killers/fire_ants/pdf/08%20FAK%20bag%20cropped.pdf The same: 2.5! See new label pd above. Took me forever to find this. --------------- This conversion only works on Scott's or similar products that have a uniform prill size. If products have a variable prill size and weight this conversion will not work out correctly.
What is the conversion between Scott drop spreader settings and lbs per square foot?
There is no direct conversion based on weight per area, because it fully depends upon the size of the granules.
What setting is needed to spread 10 lbs of fertilizer per 1000 sq ft with a speedy green broadcast spreader?
To spread 10 lbs of fertilizer per 1000 sq ft with a Speedy Green broadcast spreader, you need to adjust the spreader setting according to the manufacturer's recommendations for the specific fertilizer you are using. Typically, this involves setting the dial to a range between 5 to 8, but it can vary based on the type of fertilizer and its granule size. Always perform a calibration test by measuring the output over a smaller area to ensure you achieve the desired application rate. Additionally, check the spreader's manual for precise settings tailored to different fertilizers.
What uses does a salt spreader have?
Salt spreaders are used to spread salt onto a surface in order to melt ice and snow in the winter, making it safer to walk and drive. It is possible to use a salt spreader to spread fertilizer, but the spreader must be cleaned very well between uses to prevent contamination.
What is the conversion between Scott spreader and shindaiwa?
The conversion between Scott spreaders and Shindaiwa typically involves understanding the application rates of the specific fertilizers or products being used, as each brand may have different calibration settings. Generally, Scott spreaders have a specific number setting for their products, which can be cross-referenced with a conversion chart that aligns with Shindaiwa's settings. It's important to consult the manufacturer’s guidelines for both spreaders to ensure accurate application rates for your desired coverage. Always perform a test area to confirm the spread rate before full application.
What is the setting for Scott Speedy green 3000 for granulated lime?
The Scott Speedy Green 3000 is a broadcast spreader designed for even distribution of granular materials like lime. Its setting for granulated lime typically ranges between 5 to 7, depending on the specific product and application rate recommended for your lawn or garden. It's essential to consult the product label for precise guidelines and to adjust based on your spreader's calibration and the specific conditions of your area. Always test in a small area first to ensure even coverage.
What is the difference between BBC and CBBC?
BBC:British broadcast company CBBC:Childrens British Broadcast Company Hope this helps
How do you compost horse manure?
We scoop it into a manure spreader and spread it across the fields before the hay comes in or between cuttings.
What is vigoro spreader setting when using scotts turf builder 32-0-4?
For applying Scotts Turf Builder 32-0-4 using a Vigoro spreader, the recommended setting is typically between 3 to 4, depending on your specific model and the application rate desired. It's essential to check the spreader calibration chart that comes with your Vigoro spreader for precise settings. Always conduct a test run on a small area to ensure proper distribution and adjust if necessary.
What setting should you put 13-13-13 fertilizer on a scotts rotary spreader?
To apply 13-13-13 fertilizer using a Scotts rotary spreader, set the spreader to a setting between 3 and 4, depending on the specific model of the spreader and the application rate recommended on the fertilizer package. It's important to adjust based on the size of your lawn and the desired coverage. Always perform a test run in a small area first to ensure even distribution and avoid over-fertilization.
What is the difference between a federal republic and a parlamentary monarchy?
what is the difference between a republic and a monarchy?
