using pycnometry because the density of water is very accurate
One way to measure volume of a material is the following: Put the material in a waterproof container, e.g. a tub. Submerge the material in water, register the water level, take the material out and measure what volume of water you need to add to the tub in order to make the water rise to the level it was with the material in. The volume of water you've added equals the volume of the material.
Several things make volumetric flasks the most accurate way to measure volumes of liquids. First, they are specially calibrated and tested so that the volume listed is exactly the correct volume, often to within 0.01 mL. Secondly their shape is specially designed for accurate measurement. They have a long narrow neck with a line to mark the correct volume. Because the neck is so skinny, the water level is much more sensitive to the amount of water than if the neck was much wider (like in an erlenmeyer).Note that an erlenmeyer flask is about the worst thing I can think of to measure volumes! Much better than that is a graduated cylinder. A graduated cylinder, while somewhat less accurate than a volumetric flask does have the advantage of being able to measure different volumes, whereas a volumetric flask is designed to measure one and only one volume.
by measuring the amount of water it displaces
There are three ways to measure volume. If you are measuring a liquid, you need a graduated cyliner. If you are measuring the volume of a regular solid, you need a ruler to measure length, width, and height. You would then use the formula V=LxWxH. The third way to measure volume is to use displacement to find the volume of an irregular solid. You would put a certain amount of water in a graduated cylinder, write the starting amount down. Add the irregular solid to the graduated cylinder. Record the ending amount of liquid and subtract the ending amount minus the starting amount.
Liquids cannot really be measured in millimeters. Millimeters are a measure for length. Liquids are best measured by volume. In the metric system, milliliters are a very nice way to measure volume. There are 236.6 (two hundred thirty-six point six) milliliters in a cup of water.
The most accurate way to measure the volume of a liquid in a container is by using a graduated cylinder. Fill the cylinder with the liquid and read the measurement at the bottom of the meniscus, the curved surface of the liquid. This method provides precise volume measurements.
To find out your own volume, you can measure your body using water displacement method. Fill a tub with water, submerge yourself completely, and measure the water that is displaced. This will give you an accurate estimation of your volume.
polls
The most accurate way to measure ingredients in baking is by using a kitchen scale. This ensures precision in measuring ingredients by weight, which can lead to more consistent and successful baking results compared to using measuring cups or spoons.
Eyeballing it with a tape measure (not the most scientifically accurate way to measure it) I get 2.75 inches
The most accurate way to measure body fat is through methods like DEXA scans, hydrostatic weighing, or Bod Pod testing, which provide precise measurements by analyzing body composition.
The fastest way to measure the volume of an aquarium is to use a tank volume calculator online by entering the aquarium's dimensions (length, width, and height) in either inches, centimeters, or any other units. This tool will provide a quick and accurate volume measurement without the need for manual calculations.
Assuming the cross-section of the prism is such that its area is easily calculated, Volume of prism = Cross-sectional area * length If not, the most effective way is to submerge it in water and measure the volume of water displaced.
The most accurate way is to make a sketch of the window on a seperate sheet of paper, than measure the opening of the window, then the space between the top of the window and the ceiling, then the bottom of the window to the floor, and lastly the space on either side of the window.
If you want to measure a pound of feed for a horse, it is a good idea to use a scale. A scale will be the most accurate way to measure a pound of feed.
If the object is irregular the best way is to measure the volume of water it displaces when you immerse it completely in water.
One way to measure the volume of an irregular object is to use a graduated cylinder. Fill the cylinder about half-way with water, and measure the volume. Then, place the object in the cylinder and measure the new volume. Subtract the first from the second to find the change in volume of the water. This change in volume is the voume of the object. Unfortunately, this method will not work for all objects as some are to large to fit in a graduated cylinder and some will dissolve in water, but it is very usefull in most situations.