That will depend on the fuel being burned, the draft fanning the fire, and WHERE in the fireplace you measure the temperature. Parts of the firebox can reach temperatures of around 1500 degrees F when burning dry hardwood under draft- coal can be hotter still.
The fireplace's heat is an example of radiation.
it burns the wood
It really all depends on the type of Fireplace you have. Fireplaces usually run on a pilot with a thermocouple or thermopile. These produce their own milivolts to run the gas valve. These type of fireplaces do not need power to ignite. If the fireplace's on/off switch is a remote that runs off of batteries or is a switch on the faceplate of the fireplace, then this fireplace should work with no power. Most fireplaces have a blower that circulates the warm air it generates. This fan would be running on 120v from the street and would not work when the power goes out. You may still have a flame on, but all the heat it generates is going out the stack. Other fireplaces have no fan and are mainly for looks. You may have a fireplace that is dependent on the 120volts and will do nothing. Check the operation manual on your fireplace.
It is important that you KEEP THE FIREPLACE VENT DAMPER OPEN when you are using it. FAILURE TO DO SO CAN LEAD TO CARBON MONOXIDE POISONING AND DEATH.
Is this an insert into a previous wood burning fireplace? Direct vent or vent free? BTUs?
The best practices for setting and maintaining the temperature on a gas fireplace thermostat include setting the temperature to a comfortable level, avoiding frequent adjustments, and ensuring proper maintenance of the fireplace and thermostat to ensure efficient operation.
The purpose of a fireplace seal is to prevent air from escaping through the chimney when the fireplace is not in use. This helps to maintain the temperature inside the house and improves the efficiency of the fireplace by reducing heat loss.
Homeowners often speculate the plausibility of hanging a flat screen TV over a fireplace. To ensure no damage will be done to the TV, the temperature above the fireplace should be gauged when a roaring fire is built. If the temperature does not rise above 90 degrees Fahrenheit, it is safe to hang the television above the fireplace.
The ideal wood burning temperature for efficient combustion in a fireplace or wood stove is around 1100 to 1200 degrees Fahrenheit.
Yes, you can set the temperature on this device.
Can get up to 150-300 degrees Farhen hight
For a fireplace, it is recommended to use a high-temperature thin-set mortar specifically designed for fireplaces to ensure it can withstand the heat generated. Be sure to check with the manufacturer's guidelines for the appropriate thin-set to use for your specific fireplace project.
In a regular fireplace you burn the fuel, wood, coal, gas or propane, and the byproducts of combustion go up the chimney or out the venting. In a catayltic fireplace those by products go into a catayst that burns at a much higher temperature so it further cumbusts much of the bi-product. The result is increased efficiency and less pollutants and combustion by-products.
The correct way to write fireplace is as one word - "fireplace."
form_title= Fireplace Inserts form_header= Make your fireplace a centerpiece with a inserts. What size fireplace do you have?*= _ [50] Do you have multiple fireplaces?*= () Yes () No What is the shape of your fireplace?*= _ [50]
To protect your TV from the heat of a fireplace, ensure there is a safe distance between the TV and the fireplace to prevent overheating. Consider installing a heat shield or using a TV stand with proper ventilation to dissipate heat. Regularly check the temperature around the TV to prevent damage.
The energy conversion that occurs is from thermal energy (heat) produced by the fireplace to thermal energy absorbed by your feet, increasing their temperature.