0
What else can I help you with?
What tool for seeing that has tube with lenses a stage and a light source?
compound light microscope
WHAT ARE THE TWO GENERAL PARTS OF MICROSCOPE?
The two general parts of a microscope are the optical system and the mechanical system. The optical system includes components like the lenses and light source, which help magnify and illuminate the specimen. The mechanical system consists of the frame, stage, and adjustments that support and position the specimen for viewing. Together, these parts enable the functionality of the microscope for detailed observation.
What should be done whenever you are finished with a microscope?
remove the slide,return the low-power objective, use lens paper to clean the stage of microscope and the lenses
What should always be in place both when beginning to focus and when replacing the microscope for storage?
When beginning to focus a microscope, the stage should always be at its lowest position, and the lowest power objective lens should be in place to prevent damage to the slide and lens. Additionally, ensure that the light source is appropriately adjusted for optimal illumination. When replacing the microscope for storage, remove any slides, lower the stage, and rotate the lowest power objective into position to protect the lenses and ensure safe handling. Finally, cover the microscope with a dust cover to keep it clean and dust-free.
Name 3 things that need to be done before you put a microscope away?
Before putting a microscope away, you should first clean the lenses and stage to remove any dust or residue. Next, make sure to lower the stage and return the objectives to their lowest position to protect the lenses. Finally, cover the microscope with a dust cover to prevent contamination while it is stored.
What is a tube with lenses a stage and a light source?
A microscope.
What tool for seeing that has tube with lenses a stage and a light source?
compound light microscope
What tool for seeing has a tube with lenses a stage and a light source?
compound light microscope
What has a tube with lenses a stage and a light?
compound light microscope
A microscope that has a tube with its lenses a stage and a light source?
It sounds like you are describing a compound light microscope. This type of microscope uses lenses in the tube to magnify the image, a stage to hold the specimen, and a light source to illuminate the specimen for viewing. It is commonly used in laboratories for observing microscopic specimens.
What are the main pieces of a microscope?
The main pieces of a microscope include the eyepiece, objective lenses, stage, light source, focus knobs, and microscope body. The eyepiece is where you look through, the objective lenses magnify the specimen, the stage holds the specimen, the light source illuminates the specimen, the focus knobs adjust focus, and the body provides structural support.
What tool is used for seeing it has a tube lenses a stage and a light source?
A microscope is the tool used for observing specimens with a tube lens, a stage for holding the specimen, and a light source for illumination. Microscopes magnify and allow detailed observation of small objects or structures that are not visible to the naked eye.
Where is the slide containing the specimen placed in the microscope?
The slide containing the specimen is placed on the stage of the microscope. The stage is a flat platform where the slide sits, and it typically has clips to hold the slide in place. From the stage, the light source below illuminates the specimen for viewing through the lenses of the microscope.
Which component of the microscope is found directly under the stage and contains two sets of lenses that collect and concentrate light as it passes upward from the light source into the lens systems?
The condenser is the component of the microscope found directly under the stage that contains two sets of lenses. Its purpose is to collect and concentrate light from the light source as it passes through the lens systems to illuminate the specimen.
What way should the mirror of a microscope face?
The mirror of a microscope should face the light source, such as a lamp or natural light. This is to ensure that the light is reflected up through the microscope stage and specimen, making the specimen easier to view under the lenses.
What are the parts of the light microscope?
mirror
What is the part of the microscope that connects the objectives and ocular lenses to the base?
The main parts of the microscope are the eye-pieces, microscope tube, nose-piece, objective, mechanical stage, condenser, coarse and fine focusingknobs, and light source.
