0
What else can I help you with?
What is fillteration?
*Filtration - Darling, learn how to spell before you put a basic question up. Filtration is used to separate solids (Such as sand or small rocks) from liquids. It is set up using a funnel, filter paper, a stand and a beaker to hold the filtrate. The liquid is poured into the funnel, the solid is trapped in the filter paper and the liquid passes through into the beaker - the liquid is then called 'filtrate'.
Which scientific word is used for the substance which is left on the filter paper during filtration?
Simply, dirt. Or you could call it solid particulate matter
Which formula do you use for the calculation of absorptivity?
ANSWER:"e is a measure of the amount of light absorbed per unit concentration".Molar absorbtivity is a constant for a particular substance, so if the concentration of the solution is halved so is the absorbance, which is exactly what you would expect.The formula for the molar absorptivity is given as followings:A=ecle=A/cle = the molar absorptivitywhere A is known as the A is known as the absorbance, l measures the length of the solution the light passes through,c is theconcentration of solution in mol /dm^3.Remember that the absorbance of a solution will vary as the concentration or the size of the container varies. Molar absorptivity compensates for this by dividing by both the concentration and the length of the solution that the light passes through. Essentially, it works out a value for what the absorbance would be under a standard set of conditions - the light travelling 1 cm through a solution of 1 mol dm-3. a
When a shipping lane passes from one large body of water to another it often passes through a .?
bay
Light which bounces off the surface of an object is called?
When light changes direction as it passes through a boundary.
Which passes through filter paper without being separated a suspension or a solution why?
A solution passes through filter paper without being separated, as it consists of uniformly mixed particles (solvent and solute) at a molecular level. In contrast, a suspension contains larger particles that do not dissolve and would be held back by the filter paper, leading to separation.
Which passes through a filter paper without being separated a suspension or solution?
A solution passes through a filter paper without being separated, as it contains particles that are small enough to pass through the pores of the filter paper. Suspensions, on the other hand, contain larger particles that get trapped by the filter paper, leading to separation from the liquid.
How do you tell the difference between a solution and a suspension?
The traditional test is that a suspension scatters at least some of any light that passes through the suspension, while a solution does not.
When copper sulphat is stirred into a water water turns blue what two tests carry out to see whether this mixture is suspension or a solution?
A suspension is cloudy or will not allow light through, a solution is clear even though it can be colored. One way to test is to shine a light through the water mixture and see if it allows light to come through without breaking it up or dimming it. If it does it's a solution, if not its a suspension.
Would filter paper be usefull to seperateing a suger and water solution?
Yes, filter paper can be useful for separating a sugar and water solution. As the solution passes through the filter paper, the sugar molecules will be trapped while the water passes through, resulting in the separation of the two components.
What will happen if sugar and water is poured through a filter paper?
The sugar will dissolve in the water as it passes through the filter paper. The filter paper will only capture any insoluble impurities or particles present in the mixture, allowing the sugar solution to pass through.
How can insoluble impurities be removed from a sodium hydroxide solution?
Insoluble impurities in a sodium hydroxide solution can be removed by filtration using filter paper or a filter funnel. The solution is poured through the filter, and the insoluble impurities are left behind while the filtered sodium hydroxide solution passes through. Additional washing or rinsing of the filtered solution may be needed to ensure complete removal of impurities.
Is the filtrate the body that remains on or passes through the filter paper?
The filtrate is the liquid that passes through the filter paper and contains the substances that have been filtered. The residue is the solid material that remains on the filter paper after the liquid has passed through.
How can you use a light beam to identify a solution from a suspension?
Because of the different properties of solutions and suspensions, a beam of light can be used to differentiate the two. If a beam of light passes through the sample, it is a solution, not a suspension. Conversely, if a beam of light does not pass through a sample completely, it is a suspension, not a solution.
Does suspension scatter light?
Yes, suspension can scatter light. When light passes through a suspension, the particles in the suspension can cause the light to scatter in different directions due to interactions with the particles. This scattering can be used to determine properties of the suspension, such as particle size and concentration.
What do you called the solution from solid-liquid?
The solution from solid-liquid separation is called a filtrate, which is the liquid portion that passes through the filter and contains the dissolved components from the solid material.
The Tyndall effect is the scattering of light by the particles in a what?
The Tyndall effect is the scattering of light by the particles in a colloid or fine suspension. This effect causes the beam of light to become visible as it passes through the colloidal mixture or suspension due to the reflection and dispersion of light by the particles.
