answersLogoWhite

0

Do not allow the high power objective to tough the lenses

User Avatar

Beulah Skiles

Lvl 13
3y ago

What else can I help you with?

Continue Learning about General Science

What should always be in place both when beginning to focus and when replacing the microscope for storage?

When beginning to focus a microscope, the stage should always be at its lowest position, and the lowest power objective lens should be in place to prevent damage to the slide and lens. Additionally, ensure that the light source is appropriately adjusted for optimal illumination. When replacing the microscope for storage, remove any slides, lower the stage, and rotate the lowest power objective into position to protect the lenses and ensure safe handling. Finally, cover the microscope with a dust cover to keep it clean and dust-free.


Rules to follow when handling a microscope?

1. Always carry the microscope in an upright position with two hands. One hand should support the base and the other should be on the on the arm. Use lens paper and lens cleaning solution to clean the lenses on the microscope. Paper towel will scratch the lenses. Use a soft cloth to clean other parts of the microscope. Lens cleaning fluid and paper is a must. Do not substitute paper towel, which is far too coarse and will scratch the lenses. Always set your microscope on a clean, flat surface. 5. Always remove slides from the stage and rotate the nosepiece to the lowest power before returning the microscope to its storage area.


When you state your conclusion what should you always remember to do?

Always remember to restate your thesis. Rephrase the thesis so that it isn't the same thing.


Why should you always start with low power when using a microscope?

You don't have to its just to see the different cycles.


What are some safety precautions you should take while handling with a microscope?

captured softly with strangeness and clean and clear the eye piece and adjust the setting of it very sincerely.

Related Questions

State two rules you should remember when using a microscope?

When using a microscope, always start with the lowest magnification objective and gradually increase the magnification to avoid damaging the slides. Additionally, remember to always use both hands when handling the microscope to ensure stability and prevent accidents.


What should you remember when handling microscope slide?

Do not allow the high power objective to tough the lenses


What should always remember when you use the coarse adjustment?

It sets or adjusts the coarse of a speciment in a microscope.


What should you always remember when you use coarse adjustments?

It sets or adjusts the coarse of a speciment in a microscope.


What should i always remember when you use the coarse adjustment?

It sets or adjusts the coarse of a speciment in a microscope.


When caring a microscope one hand should hold the arm and the other hand should hold the?

When carrying a microscope, one hand should hold the arm while the other hand should support the base. This ensures stability and prevents the microscope from tipping over or being dropped. Always handle it carefully to avoid damaging the delicate components. Proper handling is essential for maintaining the microscope's functionality and longevity.


Proper handling of a microscope?

When handling a microscope, always carry it with two hands using the base and arm to prevent dropping it. Use lens paper to clean the lenses and never touch them with your fingers. Make sure to store the microscope properly in a clean and dry space.


What should always be in place both when beginning to focus and when replacing the microscope for storage?

When beginning to focus a microscope, the stage should always be at its lowest position, and the lowest power objective lens should be in place to prevent damage to the slide and lens. Additionally, ensure that the light source is appropriately adjusted for optimal illumination. When replacing the microscope for storage, remove any slides, lower the stage, and rotate the lowest power objective into position to protect the lenses and ensure safe handling. Finally, cover the microscope with a dust cover to keep it clean and dust-free.


Rules to follow when handling a microscope?

1. Always carry the microscope in an upright position with two hands. One hand should support the base and the other should be on the on the arm. Use lens paper and lens cleaning solution to clean the lenses on the microscope. Paper towel will scratch the lenses. Use a soft cloth to clean other parts of the microscope. Lens cleaning fluid and paper is a must. Do not substitute paper towel, which is far too coarse and will scratch the lenses. Always set your microscope on a clean, flat surface. 5. Always remove slides from the stage and rotate the nosepiece to the lowest power before returning the microscope to its storage area.


What is function of Arm of microscope?

The purpose of the arm is to connect the tube to the base of the microscope. When carrying a microscope you should always have one hand holding the "arm" of the microscope and one supporting the base of the microscope.


What is the function arm in microscope?

The purpose of the arm is to connect the tube to the base of the microscope. When carrying a microscope you should always have one hand holding the "arm" of the microscope and one supporting the base of the microscope.


What should you remember when you use the coarse adjustment?

It sets or adjusts the coarse of a speciment in a microscope.