ordinary combustibles
Argon gas cannot react with most substances, and can extinguish a flame if it displaces enough of the oxygen around the burning material. Argon is used as an inert gas in electric arc welding to prevent oxygen from reacting with the heated materials, such as aluminum and titanium.
the smoke and ashes are evidence
It is not completely flame resistant, but it is more flame resistant than most other materials- cotton burns extremely fast and synthetic fabrics melt.
A Bunsen burner produces heat and creates a heat source when doing an experiment. It uses methane and there is two flames a safety flame-you can put your hand through it without burning your hand and a roaring flame-this flame is blue and it is what you use when you preform an experiment.
A burning wooden splint has a visible flame at its burning end while a glowing wooden splint has glowing ember at its glowing end. Placing a glowing splint in a container with oxygen will cause it to burst into flames and become a burning splint.
The flame retardant fabric is widely used in the oil, chemical, hotel and other industry. It is a problem for us to choose the flame retardant fabric. We usually search on the internet when choosing the fabric, but we can not understand many common terms. These common terms can reflect the burning of the flame retardant fabric very preciseness and perceptual intuition. Through learning the common terms, we can know about the products more clearly. Let's learn some professional terms as bellow, 1. Burning: the flammability materials move away from the fire and produce the oxidation redox exothermic reaction with lighting in the flame and non-flame area. 2. Firing: flammability materials catches the fire, the firing process without the flame and lighting in the firing area. 3. Residual fuel: the burning materials move away from the fire and also have flame burning. 4. After glow: the burning materials move away from the fire and also burn without flame. 5. Flame burning: burning with light 6. Smouldering: a slowly burning with smog, but no light 7. Light temperature: inflammation point, the lowest temperature to keep the materials burning under the specified test condition. 8. Pyrolysis: the irreversible chemical decomposition under the non-oxydic high temperature. 9. Molten drop: drop under high temperature 10. Carbonization: the process of the materials to form the carbon residue under the pyrolysis and imperfect combustion. 11. Flame retardant: some materials have the characters of prevent, slow and stop the flame. 12. Flame spread: the expansion process of the flame 13. Damage length: the longest char length under the test condition. 14. LOI: the min concentration of the oxygenic to keep the materials in burning under the test condition. By YULONG textile
Burning Flame ended on 1998-12-06.
Burning Flame was created on 1998-10-12.
Burning Like a Flame was created in 1987.
The duration of Burning Flame III is 2700.0 seconds.
The duration of Burning Flame II is 2700.0 seconds.
The resulting compounds of any burning (oxidation) reaction of organic materials are water and carbon dioxide.
Burning Flame II ended on 2002-09-13.
Burning Flame II was created on 2002-07-29.
It is an eternalnally burning flame because it purifies our civilization.
Remove the flame's heat/oxygen/fuel supply. Oxygen could be removed by pouring water on it (do not do this for burning liquids like oil). A good way is to use a fire EXTINGUISHER.
The color of lithium in the flame test is red.