The question asked isn't well qualified but it sounds like there is hydronic baseboard with an additional heating coil in an air handling system but that is not a typical installation so what kind? I would say "Custom" it doesn't match up with standard types of installations
Air may get trapped in a radiator, leaving it cold at the top whilst it is warm at the bottom. It then needs 'bleeding'. Radiators may also have the opposite problem, where they are warm at the top yet cold at the bottom. This is caused by a build up of sludge in the radiator and will probably require professional help. Sometimes the downstairs radiators stop heating up, whilst the upstairs ones are fine. This is caused by a problem with the pump and will again require professional help.
72
creates pressure
I think.....temperature sensor :P
Central heating in homes typically uses natural gas, which is a common and efficient fuel source. In some cases, homes may use propane or heating oil, especially in areas where natural gas pipelines are not available. Electric heating systems are also an alternative, though they do not use gas. Each type of fuel has its own advantages regarding cost, efficiency, and environmental impact.
aluminum and copper
The cheapest option between electric, radiators and central heating is Gas Central Heating. The reason that gas is cheaper than electric is because electricity costs 4-6 times more than gas.
Radiators are typically powered by gas in most homes, as they are connected to a central heating system that is fueled by gas. However, there are also electric radiators available that can be used as an alternative heating option.
A Central Heating System is used to provide warmth to an entire building or portions of it. The heating is carried through vents or radiators connected by ducts or pipes.
On/Off valves in radiators turned off or clogged Another possibility is an air bubble in the loop that services the radiators that are not heating. Correction is to bleed the loop.
Silver is not commonly used in central heating radiators due to its high cost compared to other metals like aluminum, steel, and copper. These metals are more cost-effective and provide good thermal conductivity for efficient heat transfer in radiators. Silver's high price makes it an impractical choice for mass-produced heating systems.
A heating system that uses radiators to transfer thermal energy is typically a hydronic or steam heating system. In these systems, hot water or steam circulates through the radiator to transfer heat into the room. The radiator then emits heat into the surrounding space, providing warmth.
Convector central heating radiators can be purchased from many different stores, online and offline. Some examples of these stores include Plumbworld and BuyARadiator.
It's possible, but illegal. Heating system definitely not potable water.
look i am a fool and i dont know the answerb
Central heating, radiators, so-called Slant Fin or inline method.
When central heating radiators make noise when first turned on, it is often due to air bubbles trapped in the system. As the hot water flows through the radiator, it displaces the air, creating a gurgling or banging sound. Bleeding the radiators to release the trapped air can help resolve the noise issue.