0
Why do gas container need to be very strong and thick metal container?
Wiki User
∙ 7y ago
Gases are usually compressed when filled into containers. This pressure is needed so when you open the canister, the gas will come out at a usable pressure. The pressure requires that the tanks need to be strong so that they can hold the compressed gas without exploding.
Colten Gottlieb
Wiki User
∙ 6y agoThese tanks must be resistant to low temperature, corrosion, they must be tight and resist to pressure if it is needed.
Add your answer:
Earn +20 pts
Why is placing a paper label on a juice container is an indirect use of water?
Because by placing a paper label on a juice container you are indirectly using water already because you need water to make paper.
Why would a zookeeper need a strong background in science?
so they will know about the animals and what they need to survive.
What lab equipment do you need for a desalination experiment?
You need a way to boil the water and allow the condensation to collect in a condensation coil that leads to a container holding the water
Teenagers especially need this nutrient which helps build strong bones?
Teenagers especially need the nutrient calcium to help build strong bones. They also need vitamin D, iron, and vitamin C.
Which state of matter will fill a container completely?
All four states of matter could fill a container completely if there was enough of them.That said the properties of the 3 states of matter (that you need to know about for high/secondary school) are:Solid - Fixed shape and fixed volume.Liquid - No fixed shape but fixed volume.Gas - No fixed shape, no fixed volume and fill the space available.A large enough volume of liquid or solid could fill a container completely but only the smallest amount of a gas will fill the whole container.
Do you need to put a countersink on sheet metal 089 thick be for you use a cutting tap?
There is a need to put a countersink on sheet metal before you use a cutting tap. Even if the sheet metal is 089 thick, it is recommended for safety any amount of thickness.
Why does metal need to be strong?
Metal are strong because their particles are stable and very close together. This is also the reason why they are heavy. they are "strong" because of metallic bonding
Why are submarines built of hard thick sheet of metal?
Because they need to be able to withstand the pressure of the seawater outside. The deeper a submarine goes - the higher the pressure gets.
What is an object that attracts metal?
It is a magnet or a electro-magnet. If you are trying to use it as a metal detector then you will need a really strong magnet!
How do you find a niddle in a hay stack?
well first u need a metal detectorthen u need thick glovesnow u turn on metal detector and surch stack till find the needlewith the gloves on pick up the needle
How do you get rid of coffee odor from a container?
Bicarbonate of Soda absorbs smells, liberally dust the inside of your container with bicarb and leave for a day or two then wipe it clean, if the odour is very strong you may need to repeat this action.
Why submarines need thick strong walls?
When they go deep under water the pressure would increase so you would need stronger and thicker materials to cope with the force
Why do submarines have to be strong?
Submarines would need thick, strong walls because They would have to withstand the pressure of the water that would increase the deeper they go, to do this they would need stronger and thicker materials to cope with the force (This would help keep the people safe).
Container that holds 4 liters?
you will need a gallon container.
Will a short thick metal wire have better resistance compared to a long narrow metal wire?
"Better" depends on how much resistance you need for your circuit design.A short thick wire will have less resistance than a long thin wire of the same substance.Whether that's better or worse depends on how you plan to use the wire.
Does flubber need to have a container?
yes! a cilinder flip-top container!
How do you make a chinchilla cage?
well you need a container those HUGE ones and metal wire and nuts and bolts and woodok, so take off the cover and put in stuff like bowls and a hut and bedding then make a holeon the container and the wood and put the wood on the container and put the wire onnow you have a chinchilla cage
