Um... because watching things that normaly bounce shatter after you freeze them in LN2 is legen
Wait for it
dary
If you drop a piece of rubber in liquid nitrogen, (in a dewar, where the liquid nitrogen does not boil that fast), then the rubber will be frozen. In that sense, the rubber will get hard and brittle. If by 'freeze' you mean the formal definition, which is to form actual crystals, as water does when it freezes, then the rubber won't freeze. You should know that when you drop the rubber into the liquid, the liquid will boil off very quickly for a while even though it's in a dewar. That's because heat will flow straight from the rubber into the liquid.
True. Freezing would compress the gas in the ball and reduce the elasticity of the rubber in it.
Yes, we can erase pencil marks with rubber because erasers are made out of rubber
Nitrogen can freeze anything and i think it is a frozen gas.
Rubber boots, or rubber soles on boots, is an insulator
Steel or brass freeze plugs are the best ones,rubber freeze plugs are just for temporary
only if you get it wet before you try to freeze it
take a large screw driver and a hammer tap the old freeze plug in the block,replace it with a rubber freeze plug.tighten the rubber freeze plug with a wrench..the metal freeze plug that you pushed inside the block will not hurt anything..hope this helps!!!!
The inventor of vulcanized rubber, which is rubber that doesn't melt or freeze easily, was Charles Goodyear. He discovered the process of vulcanization in 1839 by mixing rubber with sulfur and applying heat. This process made rubber more durable and suitable for a wider range of applications.
Charles Goodyear
Yes, you can freeze latex rubber in a conventional freezer. Freezing can help to prolong its shelf life and maintain its properties. Just ensure the latex rubber is stored in an airtight container to prevent any odor absorption.
Charles Goodyear.
it doesn't take long if you know how to do it properly, just get to the rubber which would probably take about 5-10 mins and then it comes out easily
depends what season if it is winter it could freeze and snap (only if it has been snowing/raining)
If you drop a piece of rubber in liquid nitrogen, (in a dewar, where the liquid nitrogen does not boil that fast), then the rubber will be frozen. In that sense, the rubber will get hard and brittle. If by 'freeze' you mean the formal definition, which is to form actual crystals, as water does when it freezes, then the rubber won't freeze. You should know that when you drop the rubber into the liquid, the liquid will boil off very quickly for a while even though it's in a dewar. That's because heat will flow straight from the rubber into the liquid.
Charles Goodyear is credited with inventing vulcanized rubber in 1839, which made rubber more durable and resistant to temperature changes. This discovery revolutionized the rubber industry by providing a practical solution to the problem of rubber melting in hot temperatures and freezing in cold temperatures.
They burn plastic\rubber than freeze it over night than the next day put it in 70 degrees.