"I think vinegar is supposed to work.
Lawren1
The CRC Handbook of Chemistry and Physics (65th ed. Special:Booksources) lists plaster of Paris (calcium sulphate half-hydrate, CaS04.1/2H2O) as soluble in acid, ammonium salts, sodium thiosulphate (Na2S2O3) and glycerin."
I am so surprised that so many people on so many forums, obviously don't have a clue about the chemistry of plaster of Paris. I read in so many places things like "uh, try some kind of acid..."
So I have a lot of concentrated chemicals on hand and did lots of experiments with all kinds of acids, both dilute and concentrate, under many conditions and determined that none of my dozen or so acids dissolve Plaster of Paris in any way, but sometimes make it harder.
The chemicals which dissolved plaster of Paris are on the basic end of the PH scale, not acid. I first had some success with potassium cyanide, but what really worked better than anything is Sodium Bicarbonate. Makes sense. The sodium in baking soda hooks up with sulfur in the plaster, and the carbon hooks up with the calcium in the plaster.
TO BEST DISSOLVE PLASTER OF PARIS PLACE IT IN WARM WATER WITH LOTS OF BAKING SODA.
Don't use any acids or it will only defeat the process.
Now what really amazes me is that the answer is so simple and safe, and surely some people must know it, but it apparently cannot be found on the internet, until now.
Or you can chisel it away because it is soft enough to do so.
No, there are not different types of plaster of Paris. However, there are different types of plaster. There is plaster of Paris, pottery plaster, Puritan pottery plaster, Cerami-Cal, and Hydrostone.
Plaster of Paris (gypsum) is calcium sulfate (CaSO4.0,5H2O) - a compound.
There are approximately 226.8 grams in 8 ounces of plaster of Paris.
One way to remove plaster of Paris from a drain pipe is to pour a mixture of hot water and vinegar down the pipe to dissolve the plaster. You can also try using a drain snake or plumbing auger to physically remove the hardened plaster. If these methods don't work, you may need to consult a professional plumber to avoid damaging the pipes.
The adhesive used in plaster of Paris is water. When water is added to plaster of Paris powder, a chemical reaction occurs that causes the powder to transform into a thick paste that can then be applied to a surface before hardening.
No
Gypsum plaster (plaster of Paris) ( CaSO4·½H2O ) A large gypsum deposit at Montmartre in Paris led gypsum plaster to be commonly known as "plaster of Paris"
Plaster of Paris dissolves in water by forming a suspension of particles called a colloid. This happens because the water molecules penetrate the gaps between the plaster particles, causing them to break apart and disperse in the water. This process can be reversed by allowing the water to evaporate, leaving behind the solid plaster material.
Plaster of Paris is not waterproof, but it won't dissolve in waterTo make a snowglobe, use a jar with a lid.You can build a scene on the inside of the lid with plaster, ensure it hardens completely before putting it in the jar with water.You can embed the entire jar in a plaster scene to hide the lid.
Not if it will get wet/rained on.Yes, plaster of Paris can be used outside. Plaster of Paris is used in art, architecture and other industries. Plaster of Paris can be used both indoors and outdoors.
2CaSO4.H2O is known as Plaster of Paris.
Plaster of Paris has been used since ancient times.
Plaster of Paris has been used since ancient times.
100g of plaster of Paris will weigh 100g.
yes. Plaster of Paris is a powdered rock made from the mineral gypsum.
No, plaster of paris is not strong enough for concrete.
Plaster of Paris is non-toxic, but that doesn't mean it is safe for kids to consume. If your child ate plaster of Paris call poison control.