Air pressure is the weight of the air above you. When you ascend to some altitude
above the Earth's surface, part of the air is beneath you, so the weight of the air
above you, and therefor the pressure where you are, is reduced.
Exactly the same reason that the pressure on the football player in the middle of the
pile-up is less than the pressure on the guy with the ball, at the bottom of the pile.
At the top of Mount Everest, the percentage of oxygen in the air is the same as that at sea level (about 21% oxygen). However, atmospheric pressure decreases as altitude increases, and the atmospheric pressure at the summit of Everest is 33% that of sea level.Therefore, there is 66% less oxygen than there is at sea level.
The peak wavelength, is connected to the temperature of the objects. we have short peak wavelength when the temperature is high.
This is based on BaTiO3 and its family such as CaTiO3, Pb(Mg1/3 Nb2/3)O3 etc. these materials have a gradual transition from a macroscopic paraelectric to ferroelectric phase below the peak permittivity Curie temperature. These materials are useful because of low sintering temperature and high peak permittivity values which have application in production of Multilayer Ceramic Capacitor (MLCC). These are low cost high volumetric high electrostriction which make them attractive for actuators
Wavelength
They are not related, really. There are many forms of energy that have nothing to do with sound. Heat is a common from of energy that does not make any noise. Electricity is another. Sound is simply a moving wave of high and low pressure areas. Like ocean waves have an amplitude that correspond to the difference in height between the peak and the trough of the wave, sound waves have an amplitude corresponding to the difference between the pressure of the high and low pressure regions. The greater the difference, the greater the amplitude and the greater the intensity of the wave, and the louder the sound. But intensity is not the same as energy and I'm frankly not sure how you determine the "energy" of a noise. Presumably it depends on the intensity, the frequency, and the medium it's traveling through. Anybody else know? You do really measure the sound pressure with a sound pressure level meter. Microphones and eardrums are only sensitive to the sound pressure. Forget the energy if you are listening to music. An other thing is fighting the noise pollution. Only there you need to calculate the power and the energy. Scroll down to related links and look for more on decreasing of sound pressure with distance.
The air pressure is greater at the base of the mountain compared to the peak. This is because the weight of the column of air above decreases as you move higher up in the atmosphere, leading to lower air pressure at higher elevations.
the mountain peak
Air pressure is typically the least at high altitudes, such as at the peak of a mountain or in the upper atmosphere. This is because there is less air above exerting pressure downwards.
K 2 ( Goodwin Austin ) in India is the highest mountain peak. It is 8610 meters high.
2
europe
A peak is a highpoint so a European peak can refer to the top of any high mountain in Europe.
At high altitudes on mountains, the air pressure decreases because there is less atmosphere above pressing down. This reduction in air pressure means there are fewer molecules of air per unit volume, resulting in thinner air.
A ben is a Scottish or Irish mountain or high peak.
Mountain : a large, high peak or promontory
Mt Everest
The Hindu Kush at Noshaq(Afghanistan's highest mountain peak) is 7,492m/24,580ft high.