light does not bend and can not provide sufficent amounts of light in for visibility
Check pipe size for hot water or if galvanized pipe used, pipe could be clogged inside with rust and scale.
Accelerate
Fiber optic cables are flexible because they are made out of plastic that refracts light and keeps it inside the cable. The light pretty much bounces its way down the inside of the cable by passing through different layers of plastic that bend the light and keeps it moving towards one direction.
A pipe that is 10 inch would have the velocity of 2.75 feet. This is 2.75 feet with 722 GPM.
That drain pipe is meant to remove condensed water from the chmber where the air is blown through the system, if there is air coming through there it just means there is no water in the line that has condensed. many units turn the drain tube upward slightly so a little water always stays in the pipe pereventing the escape of cold air. It works like a P trap on your sink.
You can't see an object through a bent pipe because light does not travel in straight lines when passing through the bent pipe. The light rays are refracted as they enter the pipe, causing the object to appear distorted or blocked from view due to the curve of the pipe.
The light from the burning candle gets obstructed and scattered as it passes through the bent pipe, making it difficult to see the flame directly. The curved surface of the pipe disrupts the direct path of light, leading to a distorted image or no image at all.
The pipe has been bent in a former, no corner piece is then required.
To straighten a bent pipe using heat and cooling, apply heat to the bent portion using a torch until it becomes pliable. Once it reaches the desired temperature, use a straightening tool or a clamp to straighten the pipe as it cools. The cooling process will help the pipe retain its new shape.
Bent is the past tense and past participle of bend. The participle forms of verbs can be used as adjectives. Example: a bent pipe
Pipe is hollow, it needs to be solid when being bent. This can be with the aid of a solid mandrel, spring or even sand on the inside. With the pipe now a solid and if the bend radius isn't to sharp there should be no puckers when bending.
It is a coiled spring that is put inside a copper pipe so that it can be bent without kinking the pipe.
Tranny skateboarding is when you skate in a transition. A transition is a ramp that is sort of bent, like a half pipe/mini pipe.
This depends on the thickness of the pipe in question. When bending tubing and pipe one wants to keep the inner diameter consistent through the bend. That's what tube bending kits are designed to do. Exhaust pipes ( wich are thin ) are bent in the same fashion as tubes, only the machines are larger. You can see this if you visit a local muffler shop. If the pipe is thick walled the pipe must be heated to bend it, and then annealed. This process utilizes heavy hydraulic driven machinery. Mandrel bending is a system wich uses two heavy wheels the pipe is fed through. Sand bending is a shade tree mechanics technique where the pipe is packed with dry sand and then heated and bent by hand.
T would depend on how bent up they are already but yes pipe cleaners can be untwisted and made into other things for sure....take it from me the famous queen of pipe cleaners....Wendy The Pipe Cleaner Lady
Take-up in pipe bending refers to the amount of material that is shortened or lost in length due to the bending process. When a pipe is bent, it experiences deformation, which results in a change in the length of the straight section of the pipe. The take-up is important for ensuring accurate measurements and fitting of the pipe in its intended application, as it affects the overall dimensions and alignment. Proper calculations and adjustments for take-up help maintain the integrity and functionality of the bent pipe.
You can tell if water is running through a cast iron pipe by listening for the sound of flowing water, which often produces a distinct gurgling or rushing noise. Additionally, you might notice vibrations or a slight hum in the pipe if water is actively flowing. If there are visible signs of moisture or leaks around the pipe, that may also indicate water movement. Finally, using a flow meter can provide a definitive measurement of water flow through the pipe.