0
What else can I help you with?
Give you at least 5 special precautions in handling microscope?
Always carry the microscope by putting one hand under the shoe-shaped base and grasping the curved stand that supports the tube and its lenses with the other hand. Everything should be in working order, clean and oil free of dust. If you have a slide with a prepared sample, place it on the stage of the microscope. To maintain the good condition of your microscope, first and foremost guard it from dust. Cover the microscope with a plastic hood when you are not using the instrument and always store it in its case. Clean the microscope carefully to avoid the scratch in the lenses. If some of the lenses have fingerprints, clean them either with lens paper or with some alcohol and a cotton swab. Rinse dirty slides and cover glasses in liquid detergent and warm water.
What is the large knob on the side of the microscope that should be used first when viewing a slide it is a six letter word?
it is the COURSE adjustment knob
What is the first and foremost thing to know before you can use a microscope?
the first and foremost thing to know before you can use a microscope is how to use it?
What is the large knob on the side of a microscope that should be used first when viewing a slide?
This is the coarse adjustment knob. This should be used before the fine adjustment knob (the smaller knob) - which is for fine focusing.
What does the coarse-adjustment knob off of a microscope do?
It is the first knob you should turn to bring the object into rough focus, before tinkering with the finer tuning knobs.
What power must be in place when you first find an image in the microscope?
You should first use the lowest power setting of a microscope to find an object and then center it within the viewing area. Then, when you switch to the next higher magnification, your target should still be close to the center and easier to find and focus on.
Why should you always view a slide at a power first?
When viewing specimens or objects under a microscope, it should be set to a low power first. This allows for a wider field of view that makes an object easier to locate.
Which lens on a microscope should you use first to look at a slide?
The lens that you should use to first look at a slide on a microscope is a low power lens then move on to a higher power for more clarity.
To observe a skin cell through a microscope at highest magnification you should first?
To observe a skin cell at the highest magnification through a microscope, you should first place the skin cell slide on the microscope stage, focus the microscope using the coarse and fine focus knobs, adjust the light intensity, and then increase the magnification to the highest level possible on the microscope objective.
Why should you always view a slide at low power?
When viewing specimens or objects under a microscope, it should be set to a low power first. This allows for a wider field of view that makes an object easier to locate.
What came first electron microscope or light microscope?
compound light microscope - cell theory - electron microscope
Which focus should you use first when using the microscope to view a slide?
the widest part
What should be done whenever you are using a microscope?
Put it in a safe place. And clean it first
What are two procedures should be used to properly handle a light microscope?
Always carry the microscope with two hands, one on the base and one on the arm, to prevent dropping or damage. When focusing, use the coarse adjustment knob first for large adjustments, and then the fine adjustment knob for more precise focusing.
What was hooke's first microscope called?
the microscope
What was the name of the first microscope?
What was the name of the first microscope?
Name of first microscope?
The first microscope was called the "single lens microscope" and was invented by Zacharias Janssen in the late 16th century.
