answersLogoWhite

0

Tilting a graduated cylinder when putting something it in is is so that the object will not break. If you just drop the object straight in it will go straight to the bottom and break.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about General Science

How do you measure accurately with a graduated cylinder?

First, fill it up with water and write down the number it is at. Then drop the item that you wish to measure with. And subtract the two numbers that you get.


How do you find the volume of an irregular object by using the graduate cylinder?

Step 1) Fill the graduated cylinder with water to a specific volume (example: 50ml).Step 2) Drop the irregular shaped object into the graduated cylinder.Step 3) Measure the new level of the water in the graduated cylinder.Step 4) The difference in volumes in the graduated cylinder equals the volume of the irregular objectexample:original volume of water in cylinder = 50mlvolume of water in cylinder with irregular object = 55ml55ml - 50ml = volume of irregular object in the water = 5ml


How could the volume of a gold nugget be found using water and a graduated cylinder?

Fill the graduated cylinder half full (may be more or less depending on the actual situation) and drop in the gold nugget. Read the final volume mark and subtract the initial volume from the final volume. This difference in volume is the volume of the nugget. This is related to the principle of buoyancy and it is said to have had a colourful story behind its discovery. Read the Wikipedia article on 'Eureka (word)' to learn more.


What is the best way to measure the volume of an irregular shaped solid?

You can read the measurements wrongly depending on the type of liquid used to measure the volume for irregularly shaped objects. You should determine whether the liquid used forms an upper or lower meniscus. For regularly shaped objects, errors occur when you read the units are rounded off.


Volume of a paper clip?

Think of a paper clip as a cylinder that has been bent into a specific shape. Determine the volume of the cylinder, and you have the volume of the paper clip. So, the area of the end of the cylinder x length of the cylinder = volume of the paper clip.

Related Questions

Why should you tilt the graduated cylinder when you drop in objects?

Tilting the graduated cylinder allows the object to slide down gently without splashing or bouncing. This helps to prevent the formation of air bubbles that could affect volume measurements.


Why should you tilt a graduated cylinder when you drop in objects?

Tilting a graduated cylinder when putting something it in is is so that the object will not break. If you just drop the object straight in it will go straight to the bottom and break.


How can you measure the volume of solid with a graduated cylinder?

You can put water in the graduated cylinder and drop the solid in and see how much the water rises


How can you accurately find the volume of a can of Coke?

Put it in a graduated cylinder. a) Find a graduated cylinder big enough to hold a can of Coke. b) Make sure it has a small scale. (Smaller scales are more accurate.) c) Fill the graduated cylinder with water to a mark on the cylinder. d) Find how much higher the water is when you drop the can in.


What are some things that can happen if you drop a piece of metal into a graduated cylinder partially filled with water?

It could sink. (The metal's density is greater than water.) It could turn into a ball of flames. (If you dropped a chunk of sodium into graduated cylinder, it would react with flames or sparks.)


What is more precise a pipette or graduated cylinder?

A pipette is generally more precise than a graduated cylinder. This is because pipettes are designed to deliver specific volumes of liquid accurately, while graduated cylinders are typically used for measuring approximate volumes.


Why do you have to wet the stone before dropping it into the graduated cylinder?

If you were to drop a dry stone into a graduated cylinder it would pull a lot of air bubbles down with it (they stick to the surface, you should actually be able to see them) and that will give you an erroneous volume.


How to find the volume of an irregular shape?

To find the volume of an irregular shape, you need to use the water displacement method. If the object can fit into a graduated cylinder, fill the cylinder with enough water to adequately cover the object, but don't put the object inside the cylinder yet. Record the amount of water in the cylinder. Carefully drop the object into the cylinder. This will cause a rise in the water in the cylinder. Record this second volume. Subtract the first volume from the second volume, and the difference is the volume of the irregular object. For larger objects, use an overflow can.


How do you measure accurately with a graduated cylinder?

First, fill it up with water and write down the number it is at. Then drop the item that you wish to measure with. And subtract the two numbers that you get.


How do you find the density of a key?

fill a graduated cylinder half way up. then drop it in. see how much the water has rose. this is your density. this is also called water displacement


Explain how you find the volume of a marble using displacement?

You take a graduated cylinder,or anything you can measure water in, and put water in it. You drop the marble in and the change in water height is your volume. For example if the cylinder is filled up to 10ml and after you drop in the marble it goes to 15ml then the marble has a volume of 5ml cubed.


What pieces of equipment would be most appropriate for measuring the volume of a marble?

A graduated cylinder or a beaker with volume markings would be appropriate for measuring the volume of a marble. Simply add water to the cylinder or beaker, record the initial volume, then carefully drop the marble in and record the new volume to calculate the volume of the marble.