Water is actually a weak insulator and does not transmit current well unless it has ions in it, like saltwater does. Seaweeds are limited in their abilities to conduct electricity per se, but as they come from saltwater, the salts still present on their "leaves" conduct relatively well.
We know that the density of the sea water is more than the density of the river water. So, the weight of displaced sea water is more than the weight of displaced river water. This weight gives the upward Buoyant force to the swimmer. Thus, the apparent weight of the swimmer is less in the sea water. Hence he finds it easier to swim in the sea water.
Induction salinometers measure the electrical conductivity of seawater. At a fixed temperature, the conductivity is approximately linearly proportional to salt concentration. The nature of the salt makes a difference, and sea salt composition varies somewhat around the world. For chemical solutions other than seawater, conductivity generally increases with increasing concentration, but the factor relating conductivity to concentration depends upon the composition of the solution. For a given concentration of salt near room temperature, conductivity increases about 2% for each degree Celsius of temperature increase because the viscosity of water decreases as the temperature rises. For solutions of strong acids, the temperature coefficient is nearer 1%/ degree. (The mechanism of conductivity in strong acid solutions differs from that in salt solutions.) Temperature coefficients are smaller at elevated temperatures. Weird nonlinearities occur in aqueous solutions below 4 degrees C, as the water begins to freeze. The temperature coefficient of seawater also depends slightly on the composition of the seawater. Commercial induction salinometers which calculate temperature corrections assume some standard composition of seawater, such as that found in Copenhagen bay. This may yield errors for seawater which has been concentrated by solar evaporation, such as in the Red Sea, or seawater which has been diluted by river water or ice melt.
Hydroelectricity is electricity made from moving water. In a river dam you may spot generators. The water spins the propeller in the generator and generates hydroelectricity. 13% of hydroelectricity is made parts of Africa.
In a river,flowing water exerts a force on the swimmer. To cross the river or to swim upstream the swimmer has to overcome this resistive force. This requires spending a lot of energy. As there is no flow of water in a swimming pool, the swimmer does not have to overcome the resistive force as in river. Hence it is easier to swim in swimming pool than in a river.
The Chang River (Yangtze River), The Huang River (Yellow River), and the Xi River.
Yes, river water can conduct electricity, but its conductivity depends on the presence of dissolved ions and minerals. Freshwater typically has lower conductivity than seawater due to fewer dissolved salts. Factors such as pollution, sediment, and organic matter can increase the conductivity of river water. Overall, while river water is not a strong conductor, it can still carry electrical currents under certain conditions.
It depends. Pure water do not conduct electric current; on the other hand, we consider tap and river water as a conductor because of the ions of the decomposed materials in the water. Water transmits electricity, heat, and sound very well, so it is a conductor. An insulator would not transmit electricity, heat, or sound well.
sea water is less denser than river water.
Where freshwater mixes with seawater, and the river usually widens out, is the river estuary.
Seawater is more dense than freshwater. Therefore the seawater would sink lower than the freshwater. Ships do indeed stay higher in seawater because of the higher density or specific gravity of seawater over freshwater
Campbell River
Yes, they can. If a dam is placed across the river, falling water over the dam can drive turbines which produce electricity.
To control the river and flooding and produce electricity.
cambell river
Most dilution of seawater occurs at the surface due to processes such as precipitation, river inflow, and melting ice. This leads to a lower salinity at the surface compared to deeper ocean layers. Ocean currents can also mix and dilute seawater over large distances.
campbell river.......i think??
The official definition of the word brackish is "(of water) slightly salty, as is the mixture of river water and seawater in estuaries."