0
Why you have to wait 1 minute after inserting the thermometer into the ice water before starting to record data?
Most normal thermometers are not incredibly accurate and the reading can jump around if there's a sudden change in temp. Mostly though, it will take an ordinary thermometer a little while to adjust to a new temperature. One minute should be enough time for everything to settle down and get a good idea of what the temperature actually is.
What else can I help you with?
Do guys need to ejaculate before intercourse in order to make it last longer than a minute?
No.
What does the phrase minute grain of sand mean?
For that one minute, that the grain of sand drops, the amazement of the world is presented right before your very own eyes.I think that is what might mean ?maybe not...
Sample of a 3-minute speech?
NO!!!
If you take a 5minute shower instead of a 10 minute shower how much water will you save?
The amount of water saved by taking a 5-minute shower instead of a 10-minute shower depends on the flow rate of the showerhead. For example, if the showerhead has a flow rate of 2.5 gallons per minute, a 10-minute shower would use 25 gallons, while a 5-minute shower would use 12.5 gallons. Therefore, you would save approximately 12.5 gallons of water by reducing your shower time by 5 minutes.
How do you clean a room in 1 min?
Not unless it is a very small room. But, if you do 1 minute each day, and have a tidy approach to life, then you probably could make a room presentable in 1 minute. that would make MORE then one minute!
How many seconds do you have to wait before recording the temperature on the thermometer?
Typically, you should wait 30 seconds to 1 minute before recording the temperature on a thermometer, depending on the type of thermometer being used. This allows the thermometer to accurately read and display the temperature of the object or environment being measured.
How many minutes do you take a rectal temperature?
If using a mercury thermometer - about a minute. A digital thermometer - a few seconds.
A thermometer is taken from a room where the temperature is 20C to the outdoors where the temperature is 5C After one minute the thermometer reads 12C When will the thermometer read 6C?
Since the difference between the indoor and outdoor temperature is 15 degrees (20C - 5C), and the thermometer decreases by 8 degrees in one minute (20C - 12C), it decreases by an average rate of 8 degrees per minute. Therefore, it will take 30 minutes for the thermometer to read 6C (20C - 6C = 14C difference, and 14C / 0.5C per minute = 30 minutes).
How do you use a themometer?
stick the thermometer in your mouth and hold it under your tongue til it beeps if its an electrical one, if not then do the same but wait for about a minute or two. then check the thermometer
How to take a puppy's temperature accurately and safely?
To take a puppy's temperature accurately and safely, use a digital thermometer designed for pets. Lubricate the tip with petroleum jelly and gently insert it into the puppy's rectum about 1 inch. Hold it in place for about 1 minute until the thermometer beeps. Make sure to clean the thermometer with alcohol before and after use.
How can I accurately take a dog's temperature at home?
To accurately take a dog's temperature at home, you can use a digital thermometer designed for pets. Gently insert the thermometer into the dog's rectum and hold it in place for about one minute. Make sure to use lubrication and clean the thermometer before and after use. A normal dog temperature ranges from 100.5F to 102.5F. If you are unsure or uncomfortable doing this, it's best to consult a veterinarian.
Is it normal for the temperature to go up on a thermometer when it has come out of a ice-water bath for 1 minute?
Assuming that the surroundings are above the freezing point of water - yes - it is normal for the temperature on the thermometer to go up. It may still remain elevated even if plunged back into the ice bath since the thermometer has mass and can absorb some energy while out of the bath. There is also the phenomena that in some thermometers even when the temperature drops, the thermometer fluid sometimes remains elevated unless you "shake down" the thermometer.
How can a human thermometer be used to accurately measure a dog's temperature?
To accurately measure a dog's temperature using a human thermometer, it is important to use a digital thermometer with a flexible tip. The thermometer should be inserted gently into the dog's rectum about 1-2 inches for about 1 minute. The normal temperature for a dog is around 100-102.5 degrees Fahrenheit. It is recommended to use a separate thermometer for your dog to avoid spreading germs.
Another word for minute portion starting with p?
Particle
How do you measure room temperature using thermometer?
-- Bring thermometer into room. -- Wave it around in the air of the room for a minute or two. -- Do not hold the thermometer in your hand or breathe on it. -- Wait a while for the room temperature to get through the thermometer glass. -- Look through the glass at the sliver of liquid inside the thermometer. Find the end of the liquid, and see what number is marked on the glass at the same level. That number is your room temperature.
How to measure a dog's temperature accurately?
To measure a dog's temperature accurately, use a digital thermometer designed for pets. Insert the thermometer into the dog's rectum and hold it in place for about one minute. Normal temperature for a dog is around 100-102.5 degrees Fahrenheit.
You are operating a boat with a power ventilation system If you have just fueled this boat How long should you let the ventilation system run before starting the engine?
You are operating a boat with a power ventilation system. If you have just fueled this boat, it will take 1 minute to let the ventilation system run before starting the engine.
