answersLogoWhite

0

Yes - but for only one side of the circuit. The other side must be joined ad it will then bypass it's side of the original switch. So what ever that is will not be switched. You got good insurance?

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about General Science

How does a double pole switch work?

A switch is inserted in series with a single wire. When the switch is on, it is as if the wire had not been opened to insert the switch. When the switch is off the wire is open and no current can flow. All a double pole switch does is allows you to switch two separate wires at the same time with the same switch action. A single pole switch just switches one wire.


Where is S.P.D.T. used?

In electronics, SPDT refers to a particular type of switch; a "Single Pole Double Throw" style. Other flavors I think you may recognize now are SPST, DPDT, and TPDT. It breaks down like this; the "Pole" count (single, double, triple, etc.) refers to the number of switch contact sets that are connected to the switch lever. The "Throw" count refers to the number of positions the switch lever is designed to be set to. Light switches in your house are SPST switches.


What does a thermostat do and how does a thermostat work?

the thermostat used to control the heater and after we select the four pole switch to some number the thermostat start connect the power to the heater at the same time the heater start to heat and when we select the switch to zero position the heater not work


What is the end of a magnet called?

A pole. They are called the north pole and south pole. The north pole of a magnet is defined as the pole that, when the magnet is freely suspended, points towards the Earth's North Magnetic Pole in the Arctic.


If you held the south pole of a megnet next to a compass what would happen?

It would still point magnetic north. Magnetic north and geographic north are different. If you had it precisely at magnetic north, it would have trouble pointing, but doing so would be almost impossible because the magnetic field is constantly fluctuating.

Related Questions

What is the difference between a single pole switch and a double pole switch?

A single pole switch controls one circuit, while a double pole switch controls two separate circuits.


What are the differences between a single pole light switch and a double pole light switch?

A single pole light switch controls one circuit and has one switch, while a double pole light switch controls two circuits and has two switches.


What is a double pole switch used for and how does it differ from a single pole switch?

A double pole switch is used to control two separate circuits simultaneously, while a single pole switch only controls one circuit. This means that a double pole switch can completely disconnect both the hot and neutral wires, providing a higher level of safety and control compared to a single pole switch.


How is the 2-way circuit diagram of power switch?

By using DPST(Double Pole Single Through) switch.


What is a double pole switch and how does it differ from a single pole switch?

A double pole switch is a type of electrical switch that has two separate sets of contacts that can control two separate circuits. This means it can control two different devices or lights independently. In contrast, a single pole switch only has one set of contacts and can only control one circuit or device.


What is difference between single pole and double pole switch?

A single pole switch interrupts only one wire, which must be the live wire. A double pole switch interrupts both the live and the neutral, so it contains two separate switches operated by the same lever. Current practice is to use single-pole switches, to avoid a fault condition which could leave equipment live while switched off.


What is the difference between iron clad double pole switch and double pole single throw switch?

Answer for USA, Canada and countries running a 60 Hz supply service.The difference between a double pole switch and a single pole switch is the use of the switch in the installation or equipment. A double pole switch is used when the voltage from two circuits has to be broken. An example of this is a 240 volt supply. A single pole switch is used where there is only a single supply voltage that has to be broken.


What is the function of a double pole switch in an electrical circuit?

A double pole switch in an electrical circuit controls the flow of electricity to two separate circuits simultaneously. It can turn both circuits on or off at the same time, providing a convenient way to control multiple devices or lights with a single switch.


How can a 3-way switch be used as a single pole in a circuit?

A 3-way switch can be used as a single pole in a circuit by connecting the common terminal to either one of the traveler terminals. This effectively turns the 3-way switch into a regular on/off switch, allowing it to control the flow of electricity in the circuit like a single pole switch would.


What is the difference between double pole and triple pole?

Double pole refers to a switch that controls two separate electrical circuits, while triple pole refers to a switch that controls three separate electrical circuits. Triple pole switches are typically used for applications that require more complex wiring configurations or higher voltage control compared to double pole switches.


A SPST switch is an example of what circuit?

It stands for Single Pole Single Throw


How does a double pole light switch differ from a single pole light switch in terms of functionality and wiring?

A double pole light switch controls two separate circuits, while a single pole light switch controls only one. Double pole switches have four terminals for wiring, while single pole switches have two.