0
To find the length that, when multiplied by a width of 60 feet, gives you an area of 3,500 square feet, you can use the formula for area: Area = Width × Length. Rearranging this gives Length = Area / Width. Plugging in the values, Length = 3,500 sf / 60 ft, which equals approximately 58.33 feet.
What else can I help you with?
What is the area of a rectangle if the perimeter is 60 cm and the length is 12 cm longer than it is wide?
Perimeter of a rectangle is 2(l+b).Area of rectangle is 216 centimeter square.
How long are the queen size bed slats?
Queen size bed slats typically measure around 60 inches in width to fit the mattress, which is also 60 inches wide. The length of the slats usually matches the length of the bed frame, which is generally 80 inches for a queen size. Slats can vary slightly in length depending on the specific design of the bed frame, but they generally adhere to these standard dimensions.
The length of a rectangle is four times its width. If the perimeter of the rectangle is 60 inches. What is the area of the rectangle?
Let the length be 4x and the width be x: 2(4x+x) = 60 8x+2x = 60 10x = 60 x = 6 So: length = 24 and width = 6 Area = length*width Area = 144 square inches
What are the average dimensions of a queen mattress set?
Different countries have different descriptions for mattress sizes. In North America a Queen Size mattress is on average 60 inches wide by 80 inches in length.
The hypotenuse of a 30-60-90 triangle has length 13 what is the length of the side opposite the 60 angle?
6.5 sqrt(3) = about 11.2583 (rounded)
What is the length of kodiak island?
it is 100 miles long and 60 miles wide
What is the length and width of a single wide mobil home?
The average sizes are 10 x60 and 12/60
What is the dimension of the gym floor if its 75 ft long by 60 ft wide?
The dimensions are Length = 75 ft, Width = 60 ft. Height unspecified.
How many square feet in 40 by 60?
To get the area you multiply the length and the width. Doing the math gives an answer of 2,400 square feet.
What does 40-60 stand for in regards to the bofor?
With CANNON- first number (40) is the bore diameter in millimeters. Second number (60) is the length of the barrel in calibres- Note the spelling of calibre. It means the barrel is 60 times as long as it is wide.
Are there any bowling lanes smaller than 39 inches in width and 60 feet in length?
Yes. Highway 66 has a system that is 9' 2.5" wide for 2 lanes and as short as 32' in length.
How many 10 in squares are there in a yard of fabric 60 inches wide?
A yard of fabric is 36 inches long. If the fabric is 60 inches wide, you can calculate the number of 10-inch squares that fit into the width and length. In the width, 60 inches divided by 10 inches equals 6 squares, and in the length, 36 inches divided by 10 inches equals 3 squares. Therefore, the total number of 10-inch squares in a yard of fabric is 6 (width) x 3 (length) = 18 squares.
What is the area of a garden that is 5ft. wide and12ft. long?
To find the area of a rectangular garden, you multiply its width by its length. In this case, the area is 5 feet (width) multiplied by 12 feet (length), which equals 60 square feet. Therefore, the area of the garden is 60 square feet.
How would you measure the length of a vollyball cort?
The volleyball court, from endline to endline is 60 feet (30 feet/side). The court is 30 feet wide.
What front axle came in the 1999 Dodge Ram 3500 4x4 with the 5.9 liter motor?
Dana 60Dana 60
How do you convert a square meter to linear yard at 60 wide?
at 60 " wide how do you convert linear yards to meters
How wide is a field hockey field?
60 yards wide
