No, plywood alone is not strong enough for ceramic tile. These floors require a very sturdy subfloor at least 1 1/4" thick before the tile.
This requires either using cement board or a pored mudbed.
can you mix ceramic and porcelain tile on a bathroom floor
You couldn't tile directly over a plywood sub-floor because over time, the wood will be expanding. There are products you can use in between the plywood and tiles to keep them in place such as cement backer board.
Yes, you can install ceramic tile over plywood, but it's essential to ensure the plywood is suitable for tiling. Use at least 3/4-inch exterior-grade plywood, and consider adding a cement backer board for a more stable and moisture-resistant surface. Proper preparation, including leveling and securing the plywood, is crucial to prevent cracking in the tile. Always follow manufacturer guidelines for the best results.
You would be better of removing the plywood floor completely - and tiling over the original surface.
Granite
Improper installation. You must install cement board over the sub floor before you tile. If the tile was glued to plywood which is not waterproof, the plywood will absorb moisture which will cause the grout to crack and deteriorate
can you mix ceramic and porcelain tile on a bathroom floor
yes
Yes, you can tile over plywood when installing a new floor, but it is important to ensure that the plywood is properly prepared and in good condition to provide a stable base for the tiles.
You apply ceramic sealer, available at your tile store.
Chlorine bleach.
There are several names to describe this occupation. Ceramic Tile Installer, Ceramic Floor Mechanic, Flooring Installer, Ceramic Tile Mechanic.
You couldn't tile directly over a plywood sub-floor because over time, the wood will be expanding. There are products you can use in between the plywood and tiles to keep them in place such as cement backer board.
Yes, you can install ceramic tile over plywood, but it's essential to ensure the plywood is suitable for tiling. Use at least 3/4-inch exterior-grade plywood, and consider adding a cement backer board for a more stable and moisture-resistant surface. Proper preparation, including leveling and securing the plywood, is crucial to prevent cracking in the tile. Always follow manufacturer guidelines for the best results.
You would be better of removing the plywood floor completely - and tiling over the original surface.
you have to pull the linoleum up to lay tile. . .i would suggest a cement backer board over the existing plywood also
Granite