Tiles used on floors tend to be thicker than wall tiles. Also, floor tiles are subjected to flexing as people walk over them. Therefore, if floor tiling a wooden floor, use a flexible cement adhesive and grout designed to give and take without cracking.
Mohogany
To tile a bathroom, you must first find the center of the floor or wall. This is where you will lay your first tile. You work out from there. This way you have the cuts where they are less noticeable. Use a trowel to place tile glue on the tiles, put them in place. Use spacers to keep them apart at an equal distance. Use a tile cutter to cut tiles in areas where a whole tile is not needed. Once you are done, remove the spacers and use a trowel to grout between the tiles. Wipe away excess grout with a wet sponge.
Sadly, if you are looking to fix the tile with the grout, there is none. If you are looking for something that will not crack because of movement, a high end epoxy grout.
You need a float brush and grout. You want to make sure you have the right kind of grout. For example, you might want a sanded grout for larger grout spaces. Apply the grout with the float at a 45 degree angle, wiping as much off as you go. After it sets, use a sponge to wipe the haze from the tiles.
You can put the newer style floating wood floors onto a floor with tile. Also, if it is old VCT tile, there are glues that will allow you to use their product to glue the wood to the floor. Unfortunately, nail down wood is not acceptable.
To grout wall tile effectively and efficiently, follow these steps: Mix the grout according to the manufacturer's instructions. Apply the grout with a rubber float, pressing it into the spaces between the tiles. Use a grout float to remove excess grout from the surface of the tiles. Allow the grout to set for the recommended time before wiping off excess grout with a damp sponge. Use a grout sealer to protect the grout from stains and moisture.
You can. It is less gritty but it works. Edit - While this is true, it's important to understand the wall grout is designed for thinner grout lines, so if you use it on the floor, make sure your grout lines are thin. Otherwise, the grout will crack.
Not JUST a grout no. You can get a cement that will also work as a grout but a pure grout would not have the adhesion required to stick the tiles to the wall properly, you should not use it as a cement.
To properly grout a tile wall, first ensure the tiles are clean and dry. Mix the grout according to the instructions, then apply it to the spaces between the tiles using a rubber float. Use a damp sponge to wipe off excess grout and smooth the surface. Allow the grout to dry for the recommended time before sealing it.
To effectively clean ceramic tile floors and grout, start by sweeping or vacuuming the floor to remove loose dirt and debris. Then, mix a solution of warm water and mild detergent or a specialized tile cleaner. Use a mop or sponge to clean the tiles, focusing on the grout lines. For tough stains on grout, you can make a paste of baking soda and water and scrub with a brush. Rinse the floor with clean water and dry with a towel to prevent streaks. Regular maintenance and sealing of grout can help keep your floors looking clean and fresh.
The best way to remove grout from tile is to use a grout saw or a rotary tool with a grout removal attachment to carefully scrape away the old grout. Be sure to work slowly and methodically to avoid damaging the tile.
For a DIY home renovation project, the best tile grout tool to use is a rubber grout float. It is easy to use and helps to spread the grout evenly between tiles.
To effectively remove grout from tile, you can use a grout saw or a grout removal tool to carefully scrape out the old grout. Be sure to work slowly and methodically to avoid damaging the tile. After removing the grout, clean the area thoroughly with a damp cloth to remove any remaining debris.
To effectively remove dry grout from tile, you can use a grout saw or a grout removal tool to carefully scrape away the grout. Be sure to work slowly and methodically to avoid damaging the tile. After removing the grout, clean the area with a damp sponge to remove any remaining residue.
You can use two different types of grout for bathroom showers. If your tile requires a thin line of grout then it would be best to use a non-sanding type and for tile that requires a wider line of grout its best to use a sanding type.
To effectively remove excess grout from tile, use a grout sponge to wipe away the excess grout while it is still wet. Rinse the sponge frequently to prevent grout buildup. After the grout has dried, use a grout haze remover or a mixture of water and vinegar to clean off any remaining residue. Scrub gently with a scrub brush or sponge to avoid damaging the tile surface.
Mohogany