A wall without column structure. The wall itself support the loading from the upper floor. In conventional structure, the column support the loading from the upper beam and transfer it to the lower beam.
Usually, a load bearing wall will be perpendicular to the roof ridge.
You will need to go to the level above the wall. If girders, joists or another wall is supported by your initial wall, then that becomes a 'load'. Supported by by the wall downstarirs, Thus bearing a load
header
All exterior walls in a home are load bearing. The exterior walls on the gable end of your house do not bear much load, but the walls that the hip of the roof bear on carry your roof and ceiling joints. Interior walls are another story. Usually in a smaller one story home there is a wall that runs the midspan of the house that is load bearing for your roof and ceiling joints.
That can't be answered without seeing the details of your plans.
Usually, a load bearing wall will be perpendicular to the roof ridge.
A wall bearing no load.
Load Bearing - something that bears a load. Like a load bearing wall in a house. The wall is holding something up like the roof, another floor, etc.
Yes, you can run electrical wires in a load bearing wall.
A load-bearing wall is a structural wall that supports the weight of a building or structure above it. It is essential for the stability and integrity of the building. On the other hand, a non-load-bearing wall is not responsible for supporting any weight and is primarily used for dividing spaces or for aesthetic purposes.
A load-bearing wall itself will not cause structural damage. However, if a load-bearing wall is removed without structural replacement, yes structural damage will occur.
A load bearing wall supports a structure or weight that is above it, transferring that weight to what is below the wall. Also - The most common, as easiest to identify is the exterior wall.
To determine if a wall is load-bearing from the attic, look for vertical supports that run from the ceiling to the floor below. These supports indicate that the wall is likely load-bearing and should not be removed without professional guidance.
A load-bearing wall is a structural wall that supports the weight of a building. It is typically thicker and made of stronger materials than non-load-bearing walls. To identify a load-bearing wall in your home, look for walls that run perpendicular to the ceiling joists or rafters, as they are more likely to be load-bearing. Additionally, consult a structural engineer or contractor for a professional assessment.
You will need to go to the level above the wall. If girders, joists or another wall is supported by your initial wall, then that becomes a 'load'. Supported by by the wall downstarirs, Thus bearing a load
To determine if a wall is load bearing, you can look at the wall's position in relation to the structure, check for beams or columns above it, and consult a structural engineer if unsure.
The recommended spacing for horizontal studs in a load-bearing wall is typically 16 inches on center.