To create a semicircle in Logo, you can use the REPEAT
command to draw a series of small line segments that approximate a curved shape. For example, you can use the following commands:
REPEAT 180 [FORWARD 1 RIGHT 1]
This code moves the turtle forward by 1 unit and then turns it right by 1 degree, repeating this process 180 times to form a semicircle. Adjust the FORWARD
distance for a larger or smaller semicircle.
To draw a pentagon in MS Logo, you can use the following commands: First, set the pen down with PD and position the turtle using SETXY if needed. Then, use a loop to repeat the commands to move forward and turn: REPEAT 5 [FORWARD 100 RIGHT 72]. This will create a pentagon with each side measuring 100 units.
This is how to make a rectangle in Microsoft logo. repeat 2[fd 200 rt 90 fd 400 rt 90]
Repeat 360 [ fd 5 rt 10 ]
repeat 360[fd1 lt 1]
to make a star on ms logo the commands should be: RT 20 FD 40 RT 140 FD 40 LT 70 FD 40 RT 140 FD 40 LT 70 FD 40 RT 140 FD 40 LT 70 FD 40 RT 140 FD 40 LT 70 FD 40 RT 140 FD 40
To create a bus in MSW Logo, you can use simple shapes and commands. Start by using the REPEAT command to create the rectangular body of the bus, followed by adding wheels using circles with the CIRCLE command. You can add windows and details using the PENUP and PENDOWN commands to position the turtle appropriately. Finally, use the FILL command to color your bus as desired.
To draw a pentagon in MS Logo, you can use the following commands: First, set the pen down with PD and position the turtle using SETXY if needed. Then, use a loop to repeat the commands to move forward and turn: REPEAT 5 [FORWARD 100 RIGHT 72]. This will create a pentagon with each side measuring 100 units.
A cone
Type in pc logo software fd 40 rt 90 fd 40 rt 90 fd 40 rt 90 fd 40 done
Webdesigner Depot is an online site that provides detailed information to users about how to make a logo. There is also a YouTube video that shows how to create a logo using the software, Photoshop.
you be gay
This is how to make a rectangle in Microsoft logo. repeat 2[fd 200 rt 90 fd 400 rt 90]
Repeat 360 [ fd 5 rt 10 ]
To draw a car in MSW Logo you need to type in commands to control the turtle and draw the image. Common command to control directions of the turtle, and thus draw the car, are fd Ã? forward, lt Ã? left, and rt Ã? right. By including a number with these commands you are telling the turtle the length of the line you would like it to draw.
Provided the logo is registered as a trademark, and not in the public domain, no you cannot use it without permission.
There are 3 ways you can do this- beginner, intermediate, and expert. Beginner is if you go to www.cooltext.com and only make the logo with that sight. Intermediate is if you do that along with using Microsoft paint to add your own little touch to it. Expert would be that instead of using Microsoft paint you use photo shop, if you have it, to give your logo a more professional look.
One can create a unique sign logo for a website by using the program FotoShop or by hiring an artist to make one.