0
What else can I help you with?
What is the surface area of a milvan that measures 7 feet high 7 feet wide and 11 feet long?
539 cu ft
What is the volume of a rectangular prism that is 6 feet wide 12 feet long and 9 feet high?
The volume is 6*12*9 = 648 cubic feet.
How many square feet is a room 16 feet long by 22 feet wide and 8 feet 6 inches high is how many square feet?
A room 16 feet by 22 feet has an area of 352 square feet (16 x 22). If it is 8 feet 6 inches high, it has a volume of 2992 cubic feet (352 x 8.5).
The pz that you are using is 830 feet long with a low elevation of 220 feet and a high elevation of 315 feetwhat is the ground slope?
7 degrees
What is the length of a diagonal brace that could be used for a wall 9 feet high and 12 feet long?
Using Pythagoras' theorem the diagonal brace needs to be 15 feet
A carpenter wants to build a handicap ramp over a set os steps that is twelve feet wide and five feet high how long will the ramp be?
60 feet.
How much would it cost to build a retaining wall 125 feet long and 18 inches high?
I think: 2250
How many 2x4s are in a unit of lumber?
A standard unit of lumber, often referred to as a "lumber unit" or "board foot," typically contains 1,000 board feet. Since a 2x4 measures 1.5 inches by 3.5 inches and is usually 8 feet long, it equals 5.33 board feet per piece. Therefore, a unit of lumber contains approximately 187 pieces of 2x4s, assuming standard lengths and no waste.
How many 4 inch by 8 inch bricks are needed to build walk 6 feet wide and 24 feet long?
You don't say how high the wall is.
How many blocks to build a 2ft high wall 10ft long?
To determine the number of blocks needed to build a 2-foot high wall that is 10 feet long, you first need to know the dimensions of the blocks. Assuming standard concrete blocks are 16 inches long and 8 inches high, each block covers 1.33 square feet. The wall's area is 20 square feet (10ft x 2ft), so you would need approximately 15 blocks (20 square feet ÷ 1.33 square feet per block) to complete the wall.
How many 4-inch by 8-inch bricks are needed to build a wall 6 feet wide and 24 feet long?
Assuming you actually require 24 feet long and 6 high as a 6 wide wall will be only 4 inches high. The bricks required without cutting contingency is 803
What would it cost in labor to have a contractor build a partition wall in a hall way 3 12 feet high and 7 feet long?
Depends on the contractor. Call several in your area for an estimate.
What is the area of a square that is 24 feet long and 48 feet high?
No square can be 24 feet long and 48 feet high. All 4 sides of a square must bethe same length. If they're not, then it isn't a square.The area of a rectangle that is 24 feet long and 48 feet high is 1,152 square feet.
How long was crystal palace?
1848 feet long x 456 feet wide x 135 feet high
How many feet is a professional soccer goal?
24 feet wide, 8 feet high.
How long did it take to build the kvly tv mast?
The 2,063 feet high tower was assembled in 33 working days in 1963. There were no casualties among the 11-man crew.
How many blocks 8 x 8' x 16' do I need to build a church of 7120 feet?
You cannot be serious! That would be a church which is 1.375 miles long or high!
