VERY roughly, one cubic yard of any dry aggregate is 1.25 tonnes. (Wet sand weighs VERY roughly 1.5 tonnes)
3.246753 gallons
If you convert one metric ton of water to gallons, you would have 264.2 US gallons. This is equal to 220 UK gallons.
Assuming that the given dimensions are inches, it would be 112.2 gallons.
The weight of gravel can vary depending on its type and moisture content, but a common estimate is that one cubic yard of gravel weighs about 1.5 tons. Therefore, 3,000 yards of gravel would weigh approximately 4,500 tons (3,000 yards × 1.5 tons per yard). Always check the specific weight for the type of gravel being used for a more accurate calculation.
There would be no gallons in a 36 by 360 inch tank. It will require a third measurement to have volume.
That would be appoximately 45 gallons, but its probably slightly less than that due to the thickness of the glass and the trim(if they is trim.
That would be 1,280 ounces
80 2.5-gallon measures make 200 gallons.
There are 4 quarts in a gallon. 35 quarts would make 8 3/4 gallons.
You can make 3 gallons.
There are 2 quarts to a gallon, so 20 quarts would make 10 gallons.
Because there are 8 pints per gallon, this would be 11 gallons and 3 pints.
how many ounces do of roundup do I mix with two gallons of water?
About 0.383 gallons
To determine how many yards of gravel fit into a 55-gallon drum, you first need to convert gallons to cubic yards. A 55-gallon drum holds about 0.2 cubic yards (since 1 cubic yard equals 201.97 gallons). Therefore, approximately 0.2 cubic yards of gravel can fit into a 55-gallon drum.
175.5 gallons.
1.2 gallons