The weight of 20 mm aggregate can vary depending on its specific density, but a common estimate is around 1,600 to 1,800 kilograms per cubic meter. To convert this to kilograms for a specific volume, you would need to know the volume you are considering. For example, if you have one cubic meter of 20 mm aggregate, it would weigh approximately 1,600 to 1,800 kilograms.
no because 2cm is 20mm
The perimeter of a rectangle is the sum of its 4 sides.
A 10-piece coin typically refers to a specific denomination or type of coin, and its size can vary by country and mint. However, if you're asking whether a coin that is 20mm in diameter is the same size as a 10-piece coin, it depends on the specific 10-piece coin in question. Generally, you would need to check the specifications of that particular coin to determine if it's 20mm in size.
There are about 309 pounds in 140 kilograms. 140 kilograms x 2.20462262 pounds/1 kilogram = 308.6471668 pounds 1 kilogram = 2.20462262 pounds
12*2+20*2 = 64 mm
unit wight of 20mm aggregate
1.5 tonnes per Cubic metre.
The weight of stone aggregate varies based on its density, but a general estimate is that a cubic meter of 20mm, 40mm, and 10mm stone aggregate typically weighs around 1.5 to 1.7 tons. For example, 10mm aggregates are closer to 1.5 tons per cubic meter, while 20mm and 40mm aggregates can weigh slightly more, up to 1.7 tons. The specific weight can vary based on the type of stone and moisture content.
Approximately 5bags of cement are in 1 cu.m concrete ratio 1:3:6 with 20mm aggregate, water-cement ratio 0.5.
One cubic meter of 20mm to dust aggregate typically weighs between 1,500 to 1,800 kilograms, depending on the specific type of aggregate and its moisture content. This weight can vary slightly based on factors such as the density of the material and any included voids. For practical purposes, an average weight of around 1,600 kg per cubic meter is often used in construction.
To find out how many 20mm x 20mm squares fit in a square meter, first convert square meters to square millimeters. One square meter equals 1,000,000 square millimeters. Each 20mm x 20mm square has an area of 400 square millimeters. Dividing 1,000,000 by 400 gives you 2,500, so there are 2,500 of these squares in a square meter.
You convert everything to compatible units (volume should be in cubic meters or in liters), find the density of aggregate, and multiply the volume by the density to get the mass.
2
20
20mm
20mm
20mm