0
What else can I help you with?
Square meters in one ton of structural steel?
It is roughly 7.6m2 per ton of steel structure material. This can be used for approximate calculation.
How many y16 rebar in one ton?
The number of Y16 rebar pieces in one ton depends on the length of each rebar. Y16 rebar has a nominal diameter of 16 mm and weighs approximately 1.58 kg per meter. Therefore, in a ton (1,000 kg), there would be around 632 meters of Y16 rebar, which translates to about 63 pieces if each rebar is 12 meters long. For different lengths, the number of pieces will vary accordingly.
How many square feet will a ton of salt cover?
How many square feet will a ton of salt cover?
How many square feet in a ton of sand?
100,000,000,000
How many square feet are in one ton of steel?
221
How many ton in 76.5 cubic meters of wood chips?
To convert cubic meters to metric tons, you would need to know the density of the wood chips. Different types of wood chips have different densities, so this information is needed to provide an accurate conversion. Once you have the density, you can use the formula: weight (ton) = volume (cubic meters) x density (ton/cubic meter).
How much in a ton of wood?
The weight of a ton of wood varies depending on the type of wood, but on average, a ton of wood can be around 2000 pounds or one ton (short ton).
How many pounds are there in a ton of wood shavings?
2000 lbs of anything makes a ton (feathers, wood shavings, mud etc.)
How many pounds on a ton of wood?
2,000 pounds.
How many meters squared in a ton of sand?
1000
How many cubic meters in 1 ton of scaffold?
712
How do you work out how many squared meters a ton of sand will cover?
one ton of sand covers about 100 square feet which is about 9.3 square meters.
How many cubic feet are in a ton of wood pellets?
About 50
How many 40lb bags of wood pellets to a ton?
fifty.
How many square meters does a ton of topsoil cover?
A lot
How many meters are in a ton?
You cannot associate length and weight
Can you convert a 4x4 half ton Toyota t100 to a one ton by switching rear axles?
I want to haul fire wood, but the half ton I have won't even have a full bed without rubbing the tires.
