Forty-five carats is large for any diamond. For reference, a five carat princess cut diamond measures 9.5 x 9.5 mm.
A mitered corner is one where the material is cut at an angle, most commonly 45 degrees. Two pieces of material cut at 45 would make a 90 degree corner. Of course many other angles are possible as well.
Half the angle it is to be mounted to. Example- A 90 deg cabinet corner would require that each piece of molding is cut at 45 in order to butt up flush to each other. If a corner cap is used that cover 45 deg of the 90 deg corner, then each piece of molding would be cut to 22.5 deg in order to butt up flush to the cap.
45
65' x 45' = 2,925 square feet.
45 square meters is equivalent to 484 square feet.
In the Diamond and Pearl Pokedex, number 45 is Burmy. In the National dex, no.45 is Vileplume.
Depends on the cut and if it is natural or synthetic . Also these diamonds can be injected with dye... not good. For a good quality stone in this size, in a desirable cut - generally round $45-75k
Burmy.
The recommended angle for a 45 degree bevel cut on wood is 45 degrees.
# 45 is accually burmy
She-Ra Princess of Power - 1985 Huntara 1-45 is rated/received certificates of: Australia:G
You can find number 45 almost an where in Pokemon diamond and all you have to do in smear some honey on a tree and get number 45 which is the Pokemon Burmy that evolves into Wormadam
Yes, a table saw can cut 45 degree angles.
45=burmy 46=wormadam
She-Ra Princess of Power - 1985 Huntara 1-45 was released on: USA: 7 November 1985
It depends. In the Sinnoh Pokedex, #45 is Burmy. In the National Pokedex, #45 is Vileplume.
lv 45