answersLogoWhite

0

What else can I help you with?

Related Questions

How many lineal feet are in a roll of 30 lb roofing paper?

A standard roll of 30 lb roofing paper typically contains about 1,000 square feet of material. Given that the width of the roll is usually 36 inches (3 feet), you can calculate the lineal feet by dividing the total square footage by the width in feet. Therefore, a roll of 30 lb roofing paper generally provides approximately 333 lineal feet.


How many feet of wall paper is in an average roll?

26 feet


How many square feet is a roll 18 inches by 25 feet long?

37.5 square feet.


How many inches in a 6 inch by 25 feet roll?

The roll has 12.5 square feet of material.


How many square feet in a roll 24 inches by 50 yards?

300 square feet.


How many rolls of 15 pound felt paper does it take to cover 8 squares?

1 square = 100 square feet x 8 squares = 800 square feet. 15# felt comes in different sizes. Multiply the length of the roll x the width of the roll to find out how many square feet are in a roll. 800 divided by the square feet per roll = how many rolls you need.


How many square feet does one roll of wallpaper have?

8,435 sq. feet


How many square feet does a roll of tar paper covers?

15 lb. 400 sq. ft. 30 lb. 200 sq. ft.


How many linear feet in a roll of paper 3 feet wide by 500 feet long?

500


How many square feet in a roll of R13 insulation?

88


How many square feet does a roll of 30 pound felt paper covers?

Easy way to figure it: If the roll is 3 feet by 100 feet, it would cover 300 square feet. But you have to overlap it about 6 inches at top and bottom, so once you subtract that, it would cover about 200 square feet., When figuring a job, add some for overlap at valleys, chimneys, etc. . . Hope this helps. A standard roll of 30# felt covers 216 square feet; one-half the area of a roll of 15# felt, which covers 432 square feet. Rows are overlapped 2 inches, not 6 inches.


How many rolls of tar paper would be needed to cover an area of 12ftx80width?

To determine the number of rolls of tar paper needed to cover an area of 12 feet by 80 feet, first calculate the total area, which is 12 ft × 80 ft = 960 square feet. If a standard roll of tar paper covers about 400 square feet, you would divide the total area by the coverage per roll: 960 sq ft ÷ 400 sq ft/roll = 2.4 rolls. Since you can't purchase a fraction of a roll, you would need 3 rolls of tar paper to cover the area.