0
What else can I help you with?
What is the weight of 50mm GI pipe?
The weight of a 50mm (or 2-inch) galvanized iron (GI) pipe typically ranges between 3.5 to 5.5 kg per meter, depending on the wall thickness and specific standards used. For standard pipes, the weight can be around 4.5 kg per meter. To find the total weight, multiply the weight per meter by the total length of the pipe you have. Always refer to manufacturer specifications for precise weights.
What size gas meter do you need on your house if I am installing a tankless hot water heater?
Standard meter will suffice, need to know pressure from meter to house. Size pipe appropriately for gas pressure coming into house X distance to water heater. Gas company or plumber should be able to help with this calculation.
What is the thickness of b class gi pipe?
What is the wall thickness of B class G.I pipe? what is the weight per meter of B class G.I pipe
Proper height for rough sink pipe?
Figure 32 "
Height of grab bars for toilets?
34" to the center of the pipe.
How much is the flow rate of water from pipe of 4 inch diameter coming from elevated tank ten meter height 2 meter is the height of water surface sixty cubic meter is the capacity of the elevated tank?
4
What is the volume of 1 meter of 15mm pipe?
The volume of 1 meter of 15mm pipe can be calculated using the formula for the volume of a cylinder: πr^2h. Given the radius of the pipe (15mm/2 = 7.5mm) and the height (1 meter), you can plug these values into the formula to find the volume.
How many inch meter is present in a single pipe?
The answer depends on the cross section of the pipe and its length.
What is the standard weight of RCC Hume pipe 600 mm dia np3 class?
The standard weight of an RCC Hume pipe with a 600mm diameter and NP3 class is approximately 103 kg per meter.
How many pipes are there in one meter?
There is no such unit of measurement as the "pipe".
How many tonnes per meter of DN200 Pipe?
The weight of DN200 (200 mm nominal diameter) pipe can vary based on the material it is made from (e.g., PVC, steel, ductile iron). For example, a standard DN200 steel pipe typically weighs about 14.1 kg per meter. Therefore, this translates to approximately 0.0141 tonnes per meter. Always refer to the specific material's weight chart for precise calculations.
How many gallons of water in 350 meter of 76 inch pipe?
A 350-meter section of 76-inch inside diameter pipe has a volume of: 270,500 US gallons of water.
What is the volume of a pipe with diameter of 1 meter and length of 2 meters?
The volume of a pipe with diameter of 1 meter and a length of 2 meters is 1.57 cubic meters.
What is the height of a half pipe?
Depends on the half pipe....
How many bag of port land cement sand and gravel for 1 meter diameter concrete pipe?
To calculate the materials needed for a 1-meter diameter concrete pipe, you first need to determine the volume of the pipe. The volume of a cylindrical pipe can be calculated using the formula V = πr²h, where r is the radius and h is the height (or length of the pipe). For a 1-meter diameter pipe, the radius is 0.5 meters. If you assume a length of 1 meter, the volume is approximately 0.785 cubic meters. The typical mix for concrete is about 1 part cement, 2 parts sand, and 3 parts gravel by volume; thus, you would need about 1 bag of cement (approximately 50 kg), 0.2 cubic meters of sand, and 0.3 cubic meters of gravel for this volume.
How many liters of water in 1 meter of 4 inch pipe?
There need no be any water at all! The capacity of the pipe is 8.11 litres approx.
How much water is in 1 meter of 1 inch pipe?
6'' pipe 1 meter long how mach the watter volume
