The average household in Georgia typically uses around 50 to 70 therms of natural gas per month, depending on factors such as the size of the home, insulation, and heating habits. This can vary significantly with the seasons, especially during colder months when heating needs increase. Overall yearly usage may range from 600 to 840 therms.
6
How many letters do you need to name a minor arc?
That would depend on the length of bricks that are used. Since the average brick is about seven inches long, I'll use that length to calculate how many bricks you will need. First, multiply the length of your garden by 12 to get the length in inches: 37 x 12 = 444 inches. Then divide the 444 by 7 (the length of the bricks) which will give you 63.43. So the number of bricks you will need (if they are 7 in long) will be 64. If the bricks are a different length, just use the same formula to calculate how many you will need, or post a message to me on my message board, and I will calculate it for you.
You can calculate the x coordinate of the midpoint by: calculating the average of the x coordinates, which would be the average of the endpoints. You could also count by hand, but if you are doing schoolwork there would be no work to show.
43560, but only if you use square ones.
The number of therms required to heat a house depends on various factors, including the size of the home, insulation quality, local climate, and heating system efficiency. On average, a typical home might use between 50 to 200 therms per month during winter months. For a more accurate estimate, it's best to consider specific energy consumption data from previous heating seasons or consult with a heating professional.
US average in 2007 was about 980 therms per year per customer.
A pilot light in a typical gas appliance uses about 0.01 therms per hour.
To convert therms to BTUs, you can use the formula: 1 therm = 100,000 BTUs. Therefore, to convert therms to BTUs, simply multiply the number of therms by 100,000. For example, if you have 2 therms, the calculation would be 2 therms × 100,000 BTUs/therm = 200,000 BTUs.
To convert Therms to McF (thousand cubic feet), you can use the conversion factor that 1 Therm is approximately equal to 0.01 McF. Therefore, to convert Therms to McF, you multiply the number of Therms by 0.01. For example, if you have 100 Therms, you would calculate 100 × 0.01 = 1 McF.
A 18,000 BTU heater uses approximately 0.157 therms per hour. This can vary slightly depending on the efficiency of the heater and the specific model.
The average household in the United States typically uses between 50 to 200 therms of natural gas per month, depending on various factors such as the size of the home, climate, and usage patterns for heating, cooking, and hot water. In colder months, this number can be significantly higher due to increased heating needs. For more precise estimates, it's essential to consider regional variations and specific household energy practices.
IT DEPENDS IF YOU PUT YOU FINGER ON IT , THEN IT CAN REALLY BURN
To convert gas usage to kilowatt-hours (kWh), you need to know the energy content of the gas. On average, natural gas has an energy content of about 1,000 British thermal units (BTUs) per therm. Since 1 therm is approximately equal to 29.3 kWh, 300 therms of gas would equate to about 8,790 kWh (300 therms x 29.3 kWh/therm).
One million btu equals 10 therms. One hundred thousand btu equals one therm.
Symbol of therm is thm.Therm is a former British unit for heat.Therm is not used today to measure heat and energy.
None actually, Homes do not use wind turbines and if they did they would be on the roof rather than inside :-)