To convert tons of drain rock to cubic yards, you typically use the conversion factor that 1 ton of drain rock is approximately equal to 0.67 cubic yards. Therefore, 24 tons of drain rock would be about 16.08 cubic yards (24 tons x 0.67). However, this can vary based on the specific density of the rock, so it's always best to check with the supplier for precise conversions.
how many tons of rock are in a yard?
22.5
The weight of gravel can vary depending on its type and moisture content, but a common estimate is that one cubic yard of gravel weighs about 1.5 tons. Therefore, 3,000 yards of gravel would weigh approximately 4,500 tons (3,000 yards × 1.5 tons per yard). Always check the specific weight for the type of gravel being used for a more accurate calculation.
One yard of goose egg stones is more than one ton. One yard equals 1.27 tons. One yard of pea gravel equals 1.29 tons.
2,940 US gallons of water weighs about 11.14 metric tons.
Unless the rock is completely flat, there is no point in measuring the rock in yards.
there is about 1.25 yards to a ton,so 22.5 tons would be approx 18 yards
This depends on how much rock you will use per square yard. Suppose you intend to use 1/100 tons (=20 lb) per square yard. Then if you have one ton of rock, it will cover 100 square yards. Similarly, if you intended to use 1/50 tons per square yard, 1 ton will cover 50 square yards. In general you want to use factor labeling: If you are using x tons per square yard, then write this as (1 square yard) / (x tons of rock) = (1/x)*(square yards/tons of rock) This is called a conversion factor. Now, if you have some quantity of rock, say y tons of rock, and you want to see how many square yards it would cover you just multiply (y tons of rock)*(1/x)*(square yards/tons of rock) = y/x (square yards*tons of rock/tons of rock) = y/x square yards since the labels just divide out.
You need to know the weight of 1 cub. yard of rock.
Yards can't be converted to tons. Yards measure length, while tons measure mass.
That depends on the exact size of the rocks, - however a good rule of thumb for river rock in general is about 1.4 -1.6 tons per cubic yard. -So 14 cubic yards would be approximately 20 tons.
how many tons of rock are in a yard?
how many tons of rock are in a yard?
Yards can't be converted to metric tons. Yards measure length, while metric tons measure mass.
Depends on material. 1.25 yards of feathers is lighter that 1.25 yards of lead.
None
Your question is incomplete. Yards does not convert to tons unless we know what kind of yards and if it is cement, water or what other density you are dealing with.