In order to find the volume of the cylinder more information is required as to the actual dimensions of the cylinder. Volume is calculated by knowing the radius and height of the cylinder.
The question cannot be answered. You could have an infinitely long but infinitesimally thin cylinder, or an infiniteimally short but infinitely wide cylinder. In between these two extremes there are an infinite number of possible combinations.
74.42 gallons.
A mug in the shape of a cylinder has base with a radius of 4 cm How many milliliters of liquid does it hold if filled to height of 9 cm? Volume of a cylinder = area of base * height Base is a circle Area of a circle = π * radius squared The radius = 4 cm Area = 3.14 * r * r = ____ square cm Area = 3.14 * ___ * ___ = ____ square cm Volume of a cylinder = area of base * height You know area of the base and the height = 9 cm. Volume of a cylinder = ______ * _____ = _____ cubic cm 1 cubic cm = 1 milliliter 150 cubic cm = 150 milliliter Answer ≈ 450-455 ml
Area of a circle is pi*r^2 (Pi (r squared)), so 25.5^2*3.1415926 = 2,082.42in/sq * 33" equals: 67,413 cubic inches of water. As there are 231 cubic inches in a gallon, the said geometric solid will contain: 291.8315 gallons.
they have concrete in them because the concrete has to hold it together
a nail designed to penetrate concrete and hold
A 6 X 12 will hold more weight than a 4 X 8 of the same material because there is more surface area. Concrete strength is measured in psi, so a larger cylinder = more square inches = more pounds.
A mini mix can hold up to four cubic meters of concrete. Some may hold a little more or a little less depending on type and thickness of concrete.
How big a cylinder will one million gallons hold
Yes
FAT
A cylinder with these dimensions will hold up to 13.06 gallons of water.
Concrete forms are devices used to hold concrete in a prescribed shape until it dries. They can be made out of anything strong enough to hold the weight in - many of them are made of plywood, but they've also been made out of steel, aluminum, other pieces of concrete (oil them and the new concrete will just pop out) and even just a hole in the ground.
A 100 pound propane cylinder can hold approximately 23.6 gallons of water.
depends whether it is the four cylinder or five cylinder, if its the five cylinder it will hold six quarts.
To fill half of a cylinder, you would need to calculate the volume of the cylinder and then divide it by 2. The formula for the volume of a cylinder is πr^2h, where r is the radius and h is the height. Once you have the volume, you can convert it to cubic yards by using the appropriate conversion factor.