1 371.42857 US gallons or 5.19142188 cubic meters
It depends how deep you want the gravel to cover, if you want it to be 2 inches deep it's going to cost more than 5 inches. Also it depends how big the gravel is cut, I think that the smaller the gravel is the more it costs.
Based on sand and gravel calculator found on L.R. Faulk Construction Co. site, 1 ton of gravel (clean rock) will equal approximately 7.3 sq. ft x 6 inches deep, or 5.2 sq. ft x 3 inches deep. A ton of gravel will cover approximately 15 square yards (135 square feet) at 3 inches deep.
9.26 cubic yards for every inch of depth.
That depends on the size of the gravel and how thick a layer you want to end up with.
One side of a square is 10 inches long. How many one square inch tiles are needed to cover its area?
Plan on about 2.2 cubic yards (2.8 tons) of gravel.
3000 sq ft * 4 inches = 1000 cubic feet.
You will need about 3.7 cubic yards (around 4.75 tons) of gravel.
It depends how thick the gravel is being laid - at 4 inches thick, a cubic yard will cover 81 square feet.
2 inches = 1/6 foot Volume = 3,500/6 = 5831/3 cubic feet = 21.605 cubic yards
The amount of gravel needed to cover 252 square feet depends on how thick (that is, deep) you want the gravel. If you want the gravel to be 3 inches thick... Convert the measurement to the same units. We'll use feet. 3 inches = 1/4 foot Multiply the thickness times the area to get volume in cubic measure. 1/4 feet x 252 feet = 63 cubic feet Gravel in the US is usually sold by the cubic yard, which is 27 cubic feet Thus, 63/27 = 2 1/3 cubic yards 2 1/3 cubic yards of gravel will cover 252 square feet of area to a dept of 3 inches.
a 50 pound bag of gravel will cover approximately 2 to 3 square feet of area to a thickness of 3 to 4 inches.
5ton
It depends how deep you want the gravel to cover, if you want it to be 2 inches deep it's going to cost more than 5 inches. Also it depends how big the gravel is cut, I think that the smaller the gravel is the more it costs.
To determine how much pea gravel is needed to cover a 600 square foot driveway, you first need to decide on the desired depth of the gravel layer, typically 2-3 inches. For example, if you choose a depth of 3 inches (0.25 feet), you would calculate the volume by multiplying the area by the depth: 600 sq ft x 0.25 ft = 150 cubic feet. Since pea gravel typically weighs about 100-110 pounds per cubic foot, you would need approximately 15,000-16,500 pounds of pea gravel, which translates to about 7.5-8.25 tons.
Depends on what depth you want to spread the gravel at. This answer depends on knowing the cubic capacity of 50 lbs. of gravel.
You will need about 463 cubic yards (around 594 tons) of gravel for this area.