0
The sub floor should not be a problem if it hasn't been one for other reasons. What is most important is the installation of cement board over the sub floor to keep the tile and grout from cracking. Most marble tile used in residential buildings is not so heavy as to create weight issues.
What else can I help you with?
How thick should a sub floor be when installing ceramic tiles?
1"
How thick should a sub-floor be when installing ceramic tiles?
You need 1 1/4" of subfloor. Typically it is 3/4" of plywood or OSB and 1/2" of mudbase or cement board.
How thick is an average house floor?
The average thickness of an American house floor is about one inch. This would include the subfloor and any time of other floor covering.
What is the thickness of marble table top?
Most stone table tops and benchtops are at least 20mm thick, but they will require support for the stone along the full length and width at this thickness.
How thick is the standard floor and sub floor of pier and beam house?
It would usually be 1 1/8" plywood or 2 x 6 tongue and groove boards which would be 1 1/2".
How thick should a sub floor be when installing ceramic tiles?
1"
How thick should a sub-floor be when installing ceramic tiles?
You need 1 1/4" of subfloor. Typically it is 3/4" of plywood or OSB and 1/2" of mudbase or cement board.
What is marble gang saw cutting machine?
the marble gang saw cutting machine is a machine to make a slat of required thick from a big sized of marble from mines
How strong is marble for paving?
Marble is strong enough for paving, if it is thick enough. Usually I specify travertine marble in the landscapes I design. When I design a marble paved area that is to be sand-set in a residential setting, the marble has to be at least 1-1/2 inches thick, and ideally 2" thick, otherwise it will be too thin and will crack. I also make sure to purchase high quality marble directly from an importer that provides quality stone. Even if the stone is from the same quarry, some marble is of higher quality than other stone. If the marble is thinner, it must be set onto a reinforced concrete slab and mortar set.
What size plywood should be used for a mobile home floor?
For a mobile home floor, typically 3/4 inch thick plywood is recommended for optimal strength and durability.
Is 3.5 thick concrete ok for a basement floor?
yes it is, if that is the bottom floor
What is the Depth of hay in a stall?
You should not put eatable hay on the floor of a stall. The floor should have straw or wood shavings to absorb the urine. It should be at least 3 inches thick or deep. Cleaning the stall daily will help saving on bedding.
What thick layer covers the ocean floor?
The mantle
What is a marble veneer?
It is a thin piece of marble stone attached to another surface. For instance you can have a marble veneer counter top or a solid marble counter top. A solid marble counter top would be 1 1/2" thick marble from top to bottom...a marble veneer counter top would be 1/2" marble attached to plywood
How thick is the glass floor auckands skytower?
It is about 5 inches ^^
What is a small piece of thick material that you put on the floor?
Rug
Are bugs hard to see?
It depends on the location; for example, a bright-red ladybird would be easily seen on a black marble floor, whereas a grasshopper would be near impossible to see in a thick forest. It also depends on the size and distance away from the bug in question.
