The value of a diamond depends on its cut, its clarity, its colour and its carat weight.
A local jeweler can give you the answer you want.
The value of a diamond is two-fold:Its certified valueWhat someone will pay you for the stoneYou can buy a diamond of this cut, colour and approximate carat weight from Blue Nile, with a fewer inclusions (SI2), and spend from about $4,800 to $6,100.Because your stone has three visible inclusions, it may be valued less, perhaps considerably less, than the Blue Nile stones. I-3 is the lowest rating for gem-quality diamonds.
A two-carat diamond is a gemstone that weighs two carats.
The weight of a carat is equivalent to 200 milligrams, so a two-carat diamond weighs 400 milligrams.
It would depend on the quality of the diamond. Obviously a quarter carat is smaller than a third but if the third carat is of poor quality and the quarter is superior quality then the quarter would be worth more.Another AnswerEvery diamond is valued by its carat weight, its colour, its clarity and its cut.
The diamond either weighs 100 points, or a full carat, or it weighs 80 points or 80/100ths of a carat.
Small -- less than one carat, poorly cut stones with visible inclusions, are not very valuable
Depends on the quality of the diamond in question.
The 4 Cs of diamonds are cut, color, clarity, and carat weight. Cut refers to the diamond's proportions and how well it reflects light. Color ranges from colorless to yellow, with colorless diamonds being the most valuable. Clarity measures the presence of inclusions or blemishes within the diamond. Carat weight simply refers to the weight of the diamond.
A 625 carat diamond refers to a diamond that weighs 625 carats. Carat is a unit of measurement for gemstones, with one carat equal to 200 milligrams. A diamond of this size would be considered extremely rare and valuable.
This is a rather large diamond, with a significant yellow cast that includes at least three visible inclusions. A certified gemologist can help you value this diamond. Diamonds of this weight without much visible yellow colour and of a higher clarity can be purchased today on Blue Nile for between US$169,000 and US$684,000.
Diamond quality is measured by the four Cs, including cut, colour, clarity and carat weight. A poor quality diamond is different from a top quality, mostly based on price and value. Elements include, a poor cut, visible flaws, low carat weight, poor colour or treated colour.
'Low quality' diamonds are industrial diamonds, which make up about 80% of all diamonds mined. 'Low quality' diamonds used in jewelery could be cloudy with visible inclusions or could be poorly cut.
By looking to the diamond through the 10x loop. If there are inclusions visible the quality is lower and the price is less.Another AnswerTake your diamond to a gemologist and pay for a certificate that states its carat weight, its cut, its clarity and its colour. Then you'll know the quality of the diamond.
The price of any diamond depends greatly of its colour, purity, the existence of inclusions, and of course, the pressure of offer/demand.
Carat, Clarity, Color, and Cut. Carat weight is the weight of the diamond - one carat equals about .2 grams. Clarity is how clear or see-through the diamond is. The color of diamonds can be just about anything, but generally they are clear or a light yellow. The cut of a diamond is how proportionate and symmetrical it is.
The K indicator is a colour grade, in the slightly yellow category; VVS2 means that there are two very, very slight inclusions visible under a 10-power loop. Other grades include its carat weight and the excellence and type of its cut.
The value of a diamond is two-fold:Its certified valueWhat someone will pay you for the stoneYou can buy a diamond of this cut, colour and approximate carat weight from Blue Nile, with a fewer inclusions (SI2), and spend from about $4,800 to $6,100.Because your stone has three visible inclusions, it may be valued less, perhaps considerably less, than the Blue Nile stones. I-3 is the lowest rating for gem-quality diamonds.