A plane (flat) mirror reflects an image which is the same size and shape, and colour as the object in front of the mirror. A concave mirror can produce a magnified image. If the image is in front of the mirror it is a real image; if behind it is a virtual (non-real) image. A real image can be cast upon a white the best) surface
A concave mirror.
Plane mirrors do not create images that can be placed on a screen, only concave mirrors can.
The magnification of a concave mirror is not always positive; it depends on the position of the object relative to the mirror's focal point. When the object is placed between the focal point and the mirror, the magnification is positive, indicating an upright and virtual image. However, when the object is beyond the center of curvature, the magnification is negative, indicating an inverted and real image. Thus, the magnification can be both positive and negative based on the object's location.
The plane of a concave mirror refers to the flat surface that would be created if the mirror were extended outward from its curved surface. In optics, it serves as a reference plane for understanding the mirror's curvature and the behavior of light rays reflecting off its surface. The principal focus and the center of curvature are defined in relation to this plane, which helps in determining image formation and other optical properties.
a plain mirror does not have any convex or concave curve and thus the light that is reflected does not change in shape.the object never changes, but the image (which is the object seen in the mirror) is not tangible and is only a picture of the object.so the image and the object are the same because there is no distortion in a plain mirror.falsetrue - apexBecause of the first law of thermodynamics.
A concave mirror forms a magnified image when the object is placed beyond the focal point of the mirror.
concave mirror
A concave mirror is typically used to create a magnified image of an object. The mirror curves inward and can produce an enlarged virtual image when the object is placed within the focal length of the mirror.
The 6 cases for producing images formed by a concave mirror are: 1) Object beyond C: Real, inverted, diminished image; 2) Object at C: Real, inverted, same size image; 3) Object between C and F: Real, inverted, magnified image; 4) Object at F: No image formed; 5) Object between F and mirror: Virtual, upright, magnified image; 6) Object at infinity: Real, inverted, diminished image at focus.
Yes, the image in a concave mirror can be larger than the object if the object is placed between the focus and the mirror. This creates a virtual, magnified image.
In a concave mirror, an image is created when light rays that strike the mirror are reflected and converge to a focal point in front of the mirror. This forms either a real or virtual image depending on the position of the object relative to the focal point. The image can be magnified or diminished based on the distance of the object from the mirror.
It forms a virtual, right side up, magnified image.
It is because they produce a magnified image when held close to the mirror
When the object is far away from a concave mirror, the image formed is real, inverted, and highly magnified. This image is formed at the focal point of the mirror.
A slightly concave mirror will produce a magnified image. Most shaving mirrors have one flat side and one concave side. Try looking in each side to find the one that magnifies.
A concave mirror can give a real or virtual magnified image depending on the object's position relative to the mirror's focal point. If the object is beyond the focal point, a real and magnified image is produced; if the object is within the focal point, a virtual and magnified image is produced.
Mirrors that gives an enlarged image are basically a regular mirror just it has magnified glass.; Actually, it is a concave mirror, not a convex mirror, that is used to give an enlarged image.