answersLogoWhite

0

If only for framing you would likely be charged by the hour not by the square foot. But the price also depends on who you hire. If you hire a regular contractor you could pay about $125. per hour -- if you hire a handyman you could pay $45 - $65 per hour-- and then you need to take into consideration if you will use them to drill your electrical and tubing holes and place outlets or switches and use them to place drywall and do the painting for a complete start to finish job.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you find square footage on a sign?

Measure the length and height of thesign using a foot measure. Then multiply the lenght by the height and this will give you the square footage of the sign.


What are the differences between platform framing and balloon framing?

With platform construction, walls sit on top of subflooring.With balloon framing studs run full height from mudsill to top plate.By Eliesyn Velez:I got this from cha cha!.


How do I calculate how much drywall I need for my project?

To calculate the amount of drywall needed for your project, measure the height and width of each wall in feet. Multiply the height by the width to get the square footage of each wall. Add up the square footage of all walls to get the total square footage. Divide the total square footage by the square footage of a sheet of drywall to determine how many sheets you need.


How do you calculate square yards for wallpaper?

Measure the height of the wall from floor to ceiling. Measure the width of the wall. Multiply height x width = square footage. For square yards, divide the square footage by 9.


What is the square footage if the room is width 15' height 15' and length 18'?

Square footage is length times height. In this case measure the entire length around the room and multiply it by the height of the wall. (15 + 18 + 15 + 18) x 15 = You do the math.


How do you convert footage into square footage for parallelogram?

To convert footage into square footage for a parallelogram, you need to calculate the area using the formula: Area = base × height. Measure the length of the base and the perpendicular height from the base to the opposite side. Multiply these two dimensions together to get the area in square feet. Ensure that both measurements are in the same unit (feet) before performing the calculation.


How many square feet in 1100 cubic feet?

To determine the square footage from cubic feet, you need to know the height of the space, as square footage is a measure of area (length x width) while cubic feet is a measure of volume (length x width x height). If you have a specific height, you can calculate the square footage by dividing the cubic feet by that height. For example, if the height is 10 feet, then 1100 cubic feet would be 110 square feet (1100 ÷ 10 = 110).


How many sq ft in 386 cubic ft?

To find the square footage from cubic feet, you need to know the height of the space. If the height is 1 foot, then the square footage would also be 386 square feet. If the height is different, you would need that information to calculate the square footage.


How to calculate footage for stucco?

To calculate footage for stucco, first determine the total area of the surfaces to be covered by measuring the height and width of each wall. Multiply the height by the width to get the square footage for each wall, then sum these areas to find the total. If there are windows or doors, subtract their areas from the total square footage to get the net area that requires stucco. Finally, consider adding 10% for waste and overage.


How do you calculate the square footage of a trapezoid?

1/2*(sum of parallel bases)*height = area


How much to stain a two story condo?

Your answer depends on the square footage to be covered, and not the height of the building.


Why is height considered a polygenic trait?

Height in considered a polygenic trait because your height is influenced by multiple genes.