Masonite is generally not recommended as an underlayment for vinyl tile. While it can provide a smooth surface, it is not moisture-resistant and can absorb water, leading to potential warping or mold issues. Instead, it's better to use a product specifically designed for vinyl tile underlayment, such as foam or cork underlayment, which offers moisture protection and cushioning.
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
It is similar to roll vinyl or linoleum but cut into tiles.
The weight of vinyl tile can vary based on its thickness and composition, but on average, vinyl tile weighs about 1.5 to 2 pounds per square foot. Therefore, 500 square feet of vinyl tile would weigh approximately 750 to 1,000 pounds. Always check the specific product specifications for the most accurate weight.
Only if the vinyl was previously installed over concrete, and has a positive bond. Scar the finish of the vinyl with a hand sander (course paper), and use a high strength thinset for the installation.
not recommended & whats under the vinyl is more important than trhe vinyl.. have a pro look at it & give you a quote, you can always do it yourself if you donmt like the quote...
Yes, you can install vinyl flooring over tile as long as the tile is in good condition and the surface is properly prepared.
Yes, you can lay vinyl flooring over tile as long as the tile is in good condition and the surface is clean and smooth.
Yes, you can install vinyl flooring over existing tile as long as the tile is in good condition and the surface is smooth and clean.
Yes, you can lay vinyl plank flooring over tile as long as the tile is in good condition and the surface is smooth and level. It is important to properly prepare the tile surface before installation to ensure the vinyl planks adhere correctly.
Yes, you can put tile over vinyl flooring as long as the vinyl flooring is in good condition and properly prepared. It is important to ensure that the surface is clean, smooth, and free of any imperfections before installing the tile.
Yes but lay the recommended underlay first!
The very first Vinyl tile was created in the 1920s there's no exact date. But it was only in the 1950s that Vinyl tile evolved and become the self sticky vinyl tile.
Yes, you can put vinyl flooring over tile as long as the tile is in good condition and the surface is clean and level. It is important to follow the manufacturer's guidelines for installation to ensure a proper and long-lasting result.
The most effective method for removing vinyl tile using a vinyl tile remover is to start by scoring the tile surface with a utility knife, then using the vinyl tile remover to pry up the tiles. This tool helps to lift the tiles without damaging the subfloor, making the removal process easier and more efficient.
Vinyl is one of the cheaper types of floor tile you can use. It is a little cheaper quality but looks just as good as ceramic tile. It is easy to clean and easy to install yourself.
Yes, you can install Luxury Vinyl Plank (LVP) flooring over tile as long as the tile is in good condition and the surface is properly prepared.
Yes, you can install vinyl plank flooring over tile as long as the tile is in good condition and the surface is smooth and level. It is important to follow the manufacturer's guidelines for installation to ensure a proper and long-lasting result.