Very likely to leak, zinc in the GI pipe will be contaiminating the weld and thus you cannot get a good weld.
minus weld gaps and takeoffs from total then multiply for angle.
Threading joint, weld joint, Flanges joint
Too long an arc length allows the arc to wander creating a poorly shaped weld. The slag is usually too thin and can allow Oxygen in the air to attack the molten puddle which causes Porosity in the weld. Too short an arc length buries the slag and creates less heat which traps the slag and impurities. Keep in mind that electrode coatings help determine the correct arc length.
Grind the surface of GI pipe lightly to remove the skin which is about 0.1 to 0.2 mm, than weld the MS pipe as per the wall thickness and use accordingly the welding rod at the required gauge / Dia of the welding rod. this works fine.
Golden welds is a concept that is used in conjunction with pipeline lay and repair. The golden weld is an accepted weld without solid (and more tangible) proof of strength, for example a break test or load test.
Tuesday Weld is an American actress who began acting when she was a child. She is known for playing dramatic characters in movies and films. She also won a Golden Globe Award for Most Promising Female Newcomer.
Depends on what you are welding, but generaly welds can meet, or even weld on top of a weld.
Theodore Weld
The address of the Weld Public Library is: 25 Church Street, Weld, 04285 0120
The address of the Weld Historical Society is: Po Box 31, Weld, ME 04285-0031
A butt weld is a weld made between two straight cut profiles , a socket , or plug weld is made between a surface and a hole.
WELD - AM - was created in 1956.
The past tense of weld is welded.
Bill Weld's birth name is William Floyd Weld.
Tuesday Weld's birth name is Weld, Susan Ker.
circumfrencial weld is sometimes referred to as Girth weld. its just another term.