350x450mm with 12-16mm rebars on 5m span
That can't be answered without seeing the details of your plans.
There is no standard window size.
You will have to have an engineer spec that beam for you. You will save yourself time and money by cutting the span with a column.
To determine the appropriate beam size for spanning 10 feet, several factors must be considered, including the type of wood or material, load requirements (e.g., live load, dead load), and the beam's orientation. Generally, for a standard residential application using lumber, a beam size of 2x8 or 2x10 might suffice for moderate loads; however, consulting local building codes and a structural engineer is essential to ensure safety and compliance. Always factor in any specific conditions that may affect load-bearing capacity.
Standard meter will suffice, need to know pressure from meter to house. Size pipe appropriately for gas pressure coming into house X distance to water heater. Gas company or plumber should be able to help with this calculation.
Measure its size and determinr its species
The standard size of a utility room in a house is 4 feet by 6 feet. This varies greatly depending on the overall size of the house.
Depends on the size of the rest of the house.
A typical 2 story house is about 2400 square feet.
A fifth of whiskey typically refers to a standard bottle size of 750 milliliters. Therefore, a fifth of Jim Beam whiskey is 750 ml.
Size of openings depend on the culture you want the house to be designed s Size of openings depend on the culture you want the house to be designed s
The size of any standard CD-ROM that you have in your house.
The most accurate method to determine the appropriate beam size using an LVL beam size calculator is to input the specific dimensions and load requirements of the project into the calculator. This will provide a precise recommendation for the correct beam size needed for the job.
The formula for calculating the spot size of a laser beam is given by: Spot Size 2.44 (wavelength focal length) / beam diameter
normally, 3.5 feet*7feet will be provided for residential house
That can't be answered without seeing the details of your plans.
There is no 'standard' size for a house. The thickness of the slab depends on the state building code, local building codes, soil, and whether the house is single or multiple story. Most typically they are 8 inches thick and are laid over at least 4 inches or more of gravel. Slabs for mobile homes or very small cottages are sometimes 6 inches thick.