Generally speaking, the thickness of the plywood layed directly over floor joist.
anywhere in this range depending the thickness of the vinyl flooring 62.5 lbs - 250 lbs 4oz per sq' light standard linoleum 16oz per sq' for the heavy thicker linoleum
Yes, you should be able to. Most cork flooring tiles are floating - they click together. So, they can go on top of virtually any surface provided that it is level/flat and there are no issues of moisture.
A 50 kg bag of cement typically covers about 0.5 to 1 square meter when used for flooring, depending on the thickness of the layer applied and the mix ratio with aggregates. For a standard thickness of 5 cm for a concrete floor, you can expect to cover closer to 1 square meter. It's important to consider the specific project requirements and mixing proportions for more accurate estimates.
Depends on several factors: Type of tile Sub-flooring Straight Lay/Offset Angle, Pattern Size of Job
Tolerance of VDF Flooring 5mm
The thickness is mainly for refinishing. Thicker wood can be refinished more times than thinner. If you are laying on a cement slab, you want to use a vapor barrier. Some flooring products have a barrier preinstalled on the undersideof the flooring.
The recommended thickness of plywood for flooring installation is typically 3/4 inch.
The recommended subfloor plywood thickness for residential flooring installation is typically 3/4 inch.
I have no floor covering on my kitchen at the moment. I don't want to tile but want something durable. What is a good thickness of vinyl flooring to use?
The recommended thickness for 1/4 inch underlayment when installing flooring is typically 1/4 inch.
The recommended thickness for 1/4 inch plywood underlayment when installing flooring is typically 1/4 inch.
The recommended thickness of 1/4 inch underlayment for installing hardwood flooring is typically 1/4 inch.
this the thickness of the wood planks
The recommended underlayment thickness for installing hardwood flooring is typically around 1/4 inch to 1/2 inch. This provides a stable base for the hardwood flooring and helps to reduce noise and moisture issues.
The recommended thickness for 1/4 inch plywood underlayment when installing hardwood flooring is typically 1/2 inch.
150mm
You pull up the existing flooring with crowbars and hammers. Then smooth out the bits of wood and staples left sticking out of the joists. Hard work ! Replace with good quality plywood,same thickness when all joists are smooth and you have replaced plumbing, insulation or whatever else you went under to repair.