2000#s
quadrate rectangle
It depends on a number of factors, namely the 4 C’s: cut, clarity, color and carat weight. However, the 1 carat round brilliant cut diamond D color, VVS1 clarity and excellent cut will cost you about $ 15,000.
Depends on how much weight is above it!! but on 1 -2 story wood framed structures triple 2x12's glued and nailed will do the trick
Cones are the light sensors in your eye that sense the different wavelengths of colors. There are three different type of cone cell. An L cone, M cone, and an S cone.
Masonry cement is basically normal Portland cement with added ingredients to provide the plasticity required for masonry work. Masonry cements are pre-packaged primarily as either Type N Masonry Cement or Type S Masonry Cement. Other types are available for specific circumstances. Type N Masonry mortar is recommended for general use in building non-load bearing walls as well as for exterior veneer walls not requiring high strength. Type S Masonry mortar is recommended for use in all masonry below grade as well as in building exterior load bearing walls requiring high strength. DO NOT use masonry cement for concrete jobs
I would use type S mortar for vertical applications and portland cement for horizontal work. Portland will work for either but it is rough on your skin and hands.
No. Premixed Type S mortar contains lime, which will cause it to shrink and crack. Best to use Portland cement mixed with masonry sand and a small amount of water. Should be mixed to a nearly dry consistency and "dry-packed."
Yes, type S mortar typically requires lime to improve workability, strength, and durability. Lime also helps reduce shrinkage and cracking in the mortar mix.
1 bag of cement with 4.5 five gallon buckets of masonry sand.
The decision of whether type s or n mortar mix is better is determined by the application. N type mortar is used for above grade applications which see harsh weather while S type is used below grade like in ground application.
at building supply co. that sell concrete block and or bricks usually. they usually sell bagged masonry products like type n,s and m mortar mix as well as quickrete or sakrete bagged pre-mix bagged masonry products. An outside shot is home depot or lowes but doubtfull.
No, Type S mortar cannot be used without sand. Sand is a key ingredient in mortar mix as it helps provide the bulk and strength necessary for proper adhesion and workability. Omitting sand would result in a weak and unworkable mortar mix.
None,,type s mortar already has sand.Type S is sometimes specified for masonry at or below grade, but offers another quality. S has high compressive strength (1800 psi) but adds high tensile bond strength. S contains 2 parts portland cement, 1 part hydrated lime and 9 parts sand, and yields maximum flexural strength to fight wind, soil pressure or earthquakes. Also makes the best stucco.
Type S mortar is typically recommended for securing cinder blocks in a construction project.
Andrew Orton has written: 'Structural design of masonry' -- subject- s -: Masonry
Yes, you can use cinder block mortar for red bricks, as both require similar types of mortar for bonding. However, it's best to choose a mortar specifically designed for brick, such as Type N or S mortar, to ensure optimal performance and durability. Cinder block mortar may have different properties that could affect the aesthetic and structural qualities of the brickwork. Always consider the specific application and environmental conditions when selecting mortar.