If it's plywood, it's probably at least 3/4 real ply as opposed to 3/4 composite, what I call Japanese wood. However, I wouldn't use ply under ceramic tile. I would use at the very least the material called Hardi-Board. Ask about it at the hardware store.
form_title= Ceramic Tile form_header= Install ceramic tile in your home! Where would you like the ceramic tile installed?*= _ [50] Do you need the ceramic tile to be custom cut?*= () Yes () No () Not Sure What type of tile do you what installed?*= _ [50]
No. Porcelain is a type of ceramic. if installed correctly with first quality goods neither floor will chip, scrape or crack. All of the price in any type of tile ceramic porcelain or natural stone has completely to do with the labor involved in manufacture. The more labor or steps that are involved in adding color or glaze or sizing, the higher the cost because they have more money invested in that particular tile.
Depends on several factors: Type of tile Sub-flooring Straight Lay/Offset Angle, Pattern Size of Job
It depends on the type of tile you are using, but typically 10% is a safe number. For natural stone you may want to add a bit more waste.
This depends on many factors including what area of the county you are in and what type of subfloor you have (e.g. concrete vs. plywood). It can also depend on type of tile (e.g. natural stone is more expensive than ceramic/porcelain) and what type of hardwood/type of installation (e.g. solid vs. engineered, glue down vs. float vs. nail down) as well as width of wood. This also depends on how level your floor is/what floor prep is needed. In the NY area/mid Atlantic, it is usually less expensive to install hardwood rather than tile, esp if you have a plywood subfloor. In the South and Southwest, though, it's usually the opposite - labor is often less for tile and the homes are built on concrete slab. It's best to get estimates from actual contractors in your area and have someone look at the current condition of your floor/subfloor to give you an accurate answer to this question.
The name. Spartek tile is a brand of tile and Ceramic tile is a type of tile.
form_title= Ceramic Tile form_header= Install ceramic tile in your home! Where would you like the ceramic tile installed?*= _ [50] Do you need the ceramic tile to be custom cut?*= () Yes () No () Not Sure What type of tile do you what installed?*= _ [50]
It depends on the type of ceramic adhesive. Many of them can be taken off tile with lacquer thinner on a rag.
The type of adhesive that sticks to ceramic tile is typically a strong, waterproof adhesive specifically designed for use on ceramic surfaces.
The best type of drill bit for ceramic tile is a carbide-tipped masonry bit.
For installing ceramic tile, it is recommended to use a modified thinset mortar. This type of thinset has additives that improve adhesion and flexibility, making it ideal for ceramic tile installation.
I don't recommend it. The plywood is flexible and bends over time. Cover the plywood with Hardi Backer board first. Available in the tile department at Lowe's and Home Depot. Get the right screws for it. It's easy to install, comes in manageable size of 3 feet by 5 feet. Well worth the time, effort and money to make sure your tile job lasts.
Ceramic tile is best for bathrooms. It is easy to clean and is not a slip hazard when its wet.
ceramic tile
The best type of mortar to use for ceramic tile installation is thin-set mortar. It is a cement-based adhesive that provides a strong bond between the tile and the substrate, ensuring a durable and long-lasting installation.
Yes, you can use a steam cleaning machine to clean ceramic tile. Depending on the type of machine, you may need to change the level setting to the highest setting in order to clean the tile completely. Many people use steam mops for this type of tile.
The best type of tile blade for a grinder to use for cutting ceramic tiles is a diamond blade. Diamond blades are specifically designed to cut through hard materials like ceramic tiles efficiently and with precision.