answersLogoWhite

0

Who says they're not?

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Geometry

Can 2 flues placed side by side instead of setting one large one vent a single masonry firebox?

Yes, two flues placed side by side can vent a single masonry firebox, provided they are properly sized and installed according to local building codes and regulations. However, careful consideration must be given to ensure that the flues are adequately connected to the firebox and that there is no risk of backdraft or insufficient draft. It is advisable to consult with a qualified chimney professional to ensure the installation is safe and effective.


how much is it 2 install a chimney cap?

The cost of installingg a chimney cap varies depending on the company one hires to install the chimney cap. Some companies sell the installation service at about 125 dollars for single flue chimney caps and at about 225 dollars for multiflue caps.


What is a chimney in climbing?

Think about it as the shape of a chimney on a house. To "Chimney" one must climb between opposing rock faces, with the back and hands against one face, and the feet against the other face, or alternating between both. The chimney doesn't have to be contained on all sides, like a tunnel, or house chimney, so long as it has 2 sides to push agianst as you climb.


How tall is a two story chimney?

The height of a two-story chimney typically ranges from 20 to 30 feet, depending on the height of each story and the design of the chimney. A standard story is usually about 10 to 15 feet tall, so a two-story chimney would be constructed to accommodate this height. Additionally, factors such as the chimney's location, building codes, and architectural style can influence its final height.


How many square feet in a typical chimney?

About 200

Related Questions

What does the word flues mean in portuguese?

a smoke-duct in a chimney


What will be there if you traveled straight on the Arabian sea?

A house with a chimney


What work did a chimney sweep do?

A chimney sweep was responsible for cleaning and maintaining chimneys to ensure they functioned properly and safely. This involved removing soot, debris, and blockages from the chimney flues to prevent chimney fires and improve airflow. In historical contexts, especially during the 18th and 19th centuries, many chimney sweeps were children who faced harsh working conditions. Their work was crucial for preventing dangerous buildup and maintaining the efficiency of fireplaces and stoves.


Chimney or Fireplace Cleaning and Inspection?

form_title=Chimney or Fireplace Cleaning and Inspection form_header=7533 How many chimney flues do you need cleaned?*= {Select One,1,2,3,4 or more} Which kind of fireplace or burning device is used at your home?*= () Traditional masonry fireplace (brick or stone) () Wood stove () Pellet stove () Gas fireplace insert () Prefabricated fireplace () Don't Know () Other Which services are you in need of? (Choose all that apply)*= [] Chimney sweeping [] Chimney inspection [] Install chimney cap [] Waterproofing [] Don't Know [] Other


What is a flues gun?

Invented by Emil Flues; a three piece lock design.


Why does my chimney not smoke and others do.. gas heat?

If your chimney isn't producing smoke while others do, it could be due to the type of heating system you have. Gas heating systems typically burn cleaner than wood or coal, producing little to no smoke. Additionally, your chimney may be well-designed for ventilation, preventing smoke buildup or backdrafts that can occur in less efficient systems. Proper maintenance and clean flues also play a crucial role in ensuring optimal chimney function.


Who did chimney sweeps work for?

Chimney sweeps primarily worked for homeowners, businesses, and various establishments that required their chimneys to be cleaned and maintained. Historically, many chimney sweeps were employed by wealthy families or large institutions, as proper chimney maintenance was essential for fire safety and efficient heating. In some cases, especially during the 18th and 19th centuries, child labor was prevalent in this profession, with young boys often hired due to their small size and ability to navigate tight flues.


Can 2 flues placed side by side instead of setting one large one vent a single masonry firebox?

Yes, two flues placed side by side can vent a single masonry firebox, provided they are properly sized and installed according to local building codes and regulations. However, careful consideration must be given to ensure that the flues are adequately connected to the firebox and that there is no risk of backdraft or insufficient draft. It is advisable to consult with a qualified chimney professional to ensure the installation is safe and effective.


What are colds and flues caused by?

colds and flues are caused by bugs and viruses and tiny little specs.


How old did you have to be to sweep a chimney?

In the past, children as young as five or six years old were often employed to sweep chimneys, especially during the 18th and 19th centuries in England. This practice was largely due to their small size, which allowed them to access narrow chimney flues. However, it was also dangerous and led to numerous health issues and accidents. Eventually, laws were enacted to prohibit child chimney sweeping and establish minimum age requirements for such labor.


What is the flue made from?

A flue is typically made from materials that can withstand high temperatures and resist corrosion, such as stainless steel, clay, or masonry. Stainless steel flues are often used for their durability and resistance to rust, while clay flues are common in traditional chimney systems. The choice of material depends on the type of appliance and the specific requirements of the heating system. Proper installation and maintenance are essential to ensure the flue functions effectively and safely.


What is the value of an Ithaca 20 gauge Double barrel Flues model shotgun serial number 244160 Grade 1.5?

You have an Ithaca Flues model made in 1914 you did not mention condition, straight or pistol grip, beavertail or splinter forearm, ejectors or extractors steel or damasscuss barrels or the choke markings on the barrel flats. 500-3000