Cards in this guide (19)
What does a slashing hand motion over the neck mean by a waterskiing participant
A slashing hand motion over the neck by a waterskiing participant means cut the motor or stop.
Which of the following is true about red buoys under the us aids to navigation system
Some are know as "Nun" Buoys
Which of the following is required to operate a boat in Alaska
To operate a boat in Alaska, you are required to carry on board your certificate of number.
Which of the following must you do when anchoring at night
Display an all-around white light.
When performing a self rescue when to swim to shore
What is a requirement for fire extinguishers on a boat
Must be Coast Guard approved
What two things must be aboard every personal watercraft other than a PFD
Fire extinguisher and emergency signaling devices must be aboard
every personal watercraft.
The Best way to prevent striking a swimmer with a moving boat propeller is to do what
Always turn off engine when A swimmer is reboarding
Which is the following items are required on a 12 foot inflatable dinghy
How many fire fire extinguishers are required aboard and 18 foot powerboat with installed fuel tanks
Which one of the following poses a great a great danger
Boating accidents involving sportsman is usually a result of what
improperly or overloading the boat
Which off the following is designated as a mooring buoy
White buoy with horizontal blue stripe
A mooring buoy is a white buoy with which color stripes
Which is a characteristic of a type III pfd
A Type III PFD will not turn most unconscious wearers
face-up
Which is the following must be taken into consideration when determining a safe speed
The volume of boat traffic
How should hypothermia victims be treated
Which of the following is recommended maintenance for an inboard boat
Constant oil changes must be made. Periodic parts must be exchanged, especially those made of zinc. Debris accumulated in the engine must be removed. Search for possible leaks in the engine.
When hunting from a boat, what is the best way to maintain the boat's stability
Keep body weight low with gear distributed evenly.
