0
Rate this Study Guide:
☆☆☆☆☆A sheave is a 1. a pulley for hoisting or hauling, having a grooved rim for retaining a wire rope. 2. a wheel with a grooved rim, for transmitting force to a cable or belt. verb (used with object), sheaved, sheav·ing. to gather, collect, or bind into a sheaf or sheaves To collect and bind into a sheaf.
There are dozens of torque specifications, for the 2002 Saturn. A complete list of torque specifications, can be obtained from most General Motors dealerships
calculate the volume of water a drum can take the drum is 72inch diameter by60inch height
pie
1559
The sheave height is the distance between the shortest distance from the tip of the sheave (commonly called a "boom") and the ground. It is common to discuss the sheave height with respect to a piece of equipment and get a number which is the maximum sheave height.
The client brief and the design brief are not the same. The client brief states the client's issue and what the client expects. The design brief has to do with the design of the project.
Sheave is another name for the entire pulley, rather than the indentation.
the headgear of a mine operates the mine cage
support the headgear
Because of the pressure of the headgear
TRANSPORT MINERS UNDERGROUND
They lift the miners and they tools,so that they can go up and down
winch and sheave
The winch on the right has two sheave wheels and a counterweight
Where do you see triangulation used in this structure. Explain how triangulation helps to make head frame structure stronger
A sheave (/ʃiːv/) or pulley wheel is a grooved wheel often used for holding a belt, wire rope, or rope and incorporated into a pulley. This allows the wire or rope to move freely, minimizing friction and wear on the cable. Sheaves can be used to redirect a cable or rope, lift loads, and transmit power. A sheave (pronounced “shiv”) is actually part of the pulley system. The sheave is the rotating, grooved wheel inside the pulley.
What are the differences between the two mine winches shown
3
ترفع
What do you think a countweight does for a mine winding system.
