What size ceiling fan does the factory need?

1. The height of the plant determines the minimum distance between the blade and the ground Safety regulations require that all HVLS FAN blades must be at least 3.05 meters (10 feet) above the ground. In actual operation: Large plants over 8 meters high: most suitable for HVLS FANs with a diameter of 7.3 meters or more The blade end must maintain a safety distance of at least 0.9 meters (3 feet) from any obstacles (including lamps, pipes, equipment) 2. The coverage area requirement determines the fan diameter The coverage capabilities of HVLS FANs of different sizes vary greatly: 3m diameter: covers approximately 400600㎡ 4.2m diameter: covers approximately 8001000㎡ 7.3m diameter: single unit covers up to 2000㎡ 16 feet (about 4.9 meters): maximum coverage is 7500 square feet (about 696㎡) 3. Space usage affects wind speed requirements Assembly workshop/electronics workshop: requires gentle breeze (12m/s), choose models with patented silent tail design Warehouse/logistics center: focus on air circulation and moisture prevention, medium wind speed (23m/s) is more suitable Casting/heat treatment workshop: requires higher wind speed (3m/s or more) to dissipate high temperature and smoke

peak Ronix ∙

Lvl 1

∙ 2mo ago