NO, any shock would harm the mother before it harmed the baby.
No, the voltage from the adapter should match the voltage required by the appliance.
Power consumed by an electrical appliance will increase with a reduction of applied voltage.
With the minor voltage loss in the wiring, the voltage drop across a single appliance is the total voltage in the circuit, and doesn't change when more devices are added in parallel.
Peak value is 1.414 times the RMS voltage. On a 240 volt circuit the peak voltage is 240 x 1.414 = 339.36 volts. The peak to peak value is twice this.
No, it is generally not safe to use a 220 volt adaptor with a 110 volt appliance. Doing so can cause damage to the appliance and may pose a safety hazard. It is recommended to use the correct voltage adaptor or converter for the specific appliance to ensure proper functioning.
120V appliance will not work on 220V. Use an instrument transformer or voltage regulator to adjust the high voltage to the desired level.
To calculate the current an appliance can use, divide the power rating of the appliance (in watts) by the voltage it operates on (in volts). The formula is: Current (in amperes) = Power (in watts) / Voltage (in volts). This calculation will give you the maximum current the appliance can draw under normal operating conditions.
A high voltage will certainly damage a low voltage appliance and perhaps set fire to other things nearby.
Line voltage is understood as the voltage that the device or appliance needs to operate on. It is also referred to as the devices working voltage. Once the proper line voltage or working voltage is applied to the device it may be transformed to different voltages for different internal component circuits.
No, you cannot plug a 115V American appliance directly into a 240V Australian outlet without a voltage converter or transformer. The voltage difference could damage the appliance or cause a safety hazard. It's recommended to use a voltage converter or transformer suitable for the appliance's power requirements.
A laptop computer requires DC.
A 230-volt appliance is designed to operate using electricity supplied at a voltage of 230 volts. It is important to ensure that the outlet supplying power to the appliance matches this voltage to avoid damage to the appliance or possible safety hazards.